Panasonic panasonic hd integrated camera manual 8

(when operating selected groups)

Turn the F2 dial to select [GROUP

ON] or [GROUP OFF], and press the

F2 dial.

GROUP ON:Turn on the power of the camera in the selected group.

GROUP OFF: Switch the camera in the selected group to Standby mode.

∫Switch to Standby Mode With the USER Button

Registering [POWER OFF] to the USER buttons (USER1, USER2) and holding down the USER button will switch all connected cameras to Standby mode.

Register to the USER button

1)Press the MENU button to light the button.

2)Press the PRESET MEMORY/MENU 9 button (SETUP) to light the button.

≥The SETUP menu is displayed on the LCD panel.

3)Press the F1 dial.

4)Turn the F1 dial to display [USER1] or [USER2].

5) Rotate the F2 dial to select [POWER OFF] and press the F2 dial.

≥When the power is turned on, the zoom level, pan/tilt, and PinP display revert to their pre- standby settings. (POWER ON preset)

≥To turn off the power, hold down the power button until the status display lamp goes out. Press the power button to turn the power on. (The power cannot be turned on from the web setting screen, the wireless remote controller or the controller)

- 8 -