Panasonic Pod9cw WJ-HD316A WU-CU650 Wiring Color Code, Power and Control Inputs, Cautions

WJ-HD316A

WU-CU650

Wiring Color Code

Power and Control Inputs

POD9C

CONNECTOR A

CAMERA POWER [13 watts WV-CS954 / WV-CS574]

1	24 VAC Live	Black
2	24 VAC Live	White
3	Green	Green
4	Not Used

CONNECTOR B

ACCESSORY POWER [52 watts Heater/Blower]

1	24 VAC Live	Red
2	24 VAC Live	White
3	Green	Green
4	Not Used
Pan/Tilt Unit Only

How to assemble the connector

•Strip back the cable jacket approximately 0.1 inch (3 mm) and separate the individual conductors.

	Approx. 0.1"		Wire
Up		Insert

Contact

Prepare the individual conductors for clamping. If clamping, use Molex brand tool part number 57027- 5000 (for UL-listed-style cable UL1015) or 57026-5000 (for UL-listed-style cable UL1007).

After clamping the contacts, push them into the proper holes in the connector housing until they snap in place.

CONTROL
1	Ground	Brown

Up

Wire

2		TXB (RS485)	Red
3		TXA (RS485)	Orange
	4	RXB (RS485)	Yellow
5		RXB (RS485)	Green
ALARM IN (8-pin)
1		Alarm In 1	Black
2		Ground	Brown
3		Alarm In 2	Red
4		Ground	Orange
5		Alarm In 3	Yellow
6		Ground	Light blue or green
7		Alarm In 4	Blue
8		Ground	Purple
ALARM OUT (4-pin)
1		Alarm Out 1	Gray
2		Ground	White
3		Alarm Out 2	Pink
4		Ground	Yellow, Green, or Light blue

Caution: For lightning protection of the camera and heater/blower, the pin 3 of the connector must be connected to real electrical ground.

Contact

CAUTIONS

•Shrinking the cable-entry seal is a onetime procedure. Do not shrink the cable-entry seal until it has been determined that the unit is functioning.

•CONNECT THIS TO A 24 VAC CLASS 2 POWER SUPPLY ONLY.

3	4	4	3
1		2	1
	2

CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, THE UL-LISTED WIRE VW-1, STYLE 1007, SHOULD BE USED FOR THE CABLE FOR 24 VAC INPUT TERMINALS.

Operating Distances
Awg Size	Impedance	Max Distance
Awg #12	1.71 ohm/1000 ft.	440 ft.
Awg #14	2.73 ohm/1000 ft.	270 ft.
Awg #16	4.35 ohm/1000 ft.	170 ft.
Awg #18	6.92 ohm/1000 ft.	100 ft.

- -