Panasonic PT-53WX54 DVI Digital Visual Interface input connection, Special Remote Buttons

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

The DVI/HDCP1 input on your PTV can accommodate copy protected digital programming. The DVI/HDCP input

terminal complies with the EIA-861Profiles2standard and is not intended for use with personal computers. The DVI/ HDCP input can be connected to an EIA/CEA 861 compliant consumer electronic device, such as a set top

box or DVD player equipped with a DVI output connection3.

The DVI/HDCP input is designed for best performance with HDTV signals, such as 1080i. The DVI/HDCP input will also accept and display 480i and 480p picture signals.

Notes:

1.DVI/HDCP = Digital Visual Interface / High-Bandwidth Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3.Consult your consumer electronics dealer for availability details.

Follow the diagram below to connect the PTV to a set top box or a DVD player.

Special Remote Buttons

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. For example:

•If receiving STEREO, SAP and MONO or receiving STEREO and MONO only, pressing SAP button, the audio will toggle as follows:

STEREO SAP MONO

ASPECT Button

Customer Options depending on Component Input Signal

INPUT	DISPLAY ON SCREEN	ASPECT BUTTON
SIGNAL		OPTIONS
1080i	16:9 only	No options
480p (16:9)	Default to 16:9	4:3, Full or Zoom (see
		below)
	Default to FULL mode.	4:3, Full or Zoom (see
480p (4:3)	Note: Will stretch picture
		below)
	horizontally.
480i	Default to JUST mode	4:3, Full, Just or
		Zoom (see below)

The ASPECT button on the remote control lets you choose

ENGLISH

TERMINALS ON BACK OF PROJECTION TELEVISION

DVI OUT JACKS ON BACK OF STB OR

DVD PLAYER

		AUDIO OUT
DVI OUT	L	R

one of four display modes, depending on the formats of the received signal and your preferences.

	VIDEO
	Y						DIGITAL
							IN
ANT 1	PB
					S-VIDEO
	PR					VIDEO
							L
SPLIT OUT	L					L	AUDIO
							R
	R					R
ANT 2	1	2
	AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
	VIDEO INPUT		1	2	3	OUT	AMP

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i or 480p		4
	4:3	3

This will display a 4:3 picture at its standard 4:3 size with gray side bars. (Not recommended for viewing 4:3 pictures as it may create a permanent image on

CABLES NOT SUPPLIED

Procedure

•Press TV/VIDEO button on the remote control to select DIGITAL-IN input.

•Connect the DVI output from the set top box or a DVD player to the DIGITAL IN input on the back of the PTV.

•Connect the Audio Out signal from the set top box or DVD player to the L and R Audio inputs associated with the DIGITAL IN input.

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i	or 480p	16
	ZOOM	9

screen if displayed for a prolonged period of time.)

This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for letterbox pictures.)

Note: If menu is displayed while in Zoom mode, the aspect will change to Full to display complete menu.

Input Signal			This will show picture at full
	ASPECT	Image on
		16:9 Screen Size	screen size. (Recommended
480i	or 480p	16	for anamorphic pictures.)
	FULL		9

			This will stretch the right and
Input Signal	ASPECT	Image on	left edges of a 4:3 picture to
		16:9 Screen Size	fill the screen, The center of

480i	16		the screen will have aspect
JUST		9	correction applied. The size
			of the picture will depend on
			the original signal.
			(Recommended for regular
			TV viewing.)

9z