Panasonic PT-AE1000U Serial terminal, Connection Sub 9 pin male, Pin assignments and signal names

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter.

Connection

D-sub 9 pin (male)

PC	Serial terminal
	(male)

NOTE:

You must use only an RS-232C Serial Interface Cable with a ferrite core, type ET-ADSER.

Pin assignments and signal names

Pin No.	Signal name	Contents
A		NC
B	TXD	Transmitted data
C	RXD	Received data
D		NC
E	GND	Earth
F		NC
G	RTS	Connected internally
H	CTS
I		NC

Communication settings

Signal level	RS-232C	Character length	8 bits
Sync. method	Asynchronous	Stop bit	1 bit
Baud rate	9 600 bps	X parameter	None
Parity	None	S parameter	None

Appendix

46 - ENGLISH