BLOCKED NAME | The caller’s name is blocked from transmission. |
REPT | Repeat call message. Indicates that a new call from the same number was |
| received more than once. |
NO DATA | No Caller ID information was received. |
EMPTY | Indicates a memory location is vacant. |
NO CALLS | Indicates no CID records have been stored. |
HANDSET SOUND SIGNALS
Signal | Meaning |
A long warbling tone | Signals an incoming call |
(with ringer on) |
|
Two long beeps | Confirmation Tone |
One short and one long beep | Page signal |
One short beep | Low battery warning |
every seven seconds |
|
|
|
HEADSET AND BELT CLIP OPERATION
CONNECTING AN OPTIONAL HEADSET TO THE HANDSET
For hands free conversation, connect the headset (optional) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected.
EN
TIP: To order a headset, please see in www.oregonscientific.com.
Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately 2 to 3 inches from your mouth.
•Press the TALK/CALLBACK button to answer or place a call before using the headset.
headset jack
- | + | F |
TALK M
1 2 3
4 5 6
7 8 9
* 0 9
headset plug
36
39 | 5/20/2005, 12:09 PM |
