Oregon Scientific OS6976 Programmable Timer, Chain Dialing From Memory, Setting The Timer

EN

CHAIN DIALING FROM MEMORY

Use this feature to make calls which require a sequence of numbers such as using a calling card for a frequently called long distance number. Basically, you dial each part of the sequence from memory. The following example shows how you can use chain dialing to make a call through a long distance service:

The Number For		Memory Location
Long distance access number			7
Authorization code			8
Frequently called long distance number			9
1.	Make sure the phone is ON.
2.	Press mem and then press 7.
3.	When you hear the access tone, press mem again and then press 8.
4.	At the next access tone, press mem and then 9.

TIP: Wait for the access tones between pressing the memory button, or your call might not go through.

PROGRAMMABLE TIMER

Keep track of baking or cooking times with the built-in, easy-to-read digital display timer. A loud two-minute alarm sounds when countdown time expires.

Both handset and the Kitchen Companion has the timer functions.

SETTING THE TIMER

At the handset

1.Make sure the handset is OFF (not in TALK mode).

2.Press the timer button.

3.The unit displays SET TIMER 00 MIN 00 SEC, and the first digit (minutes) blinks in the display.

4.Press the desired number 0-9.

5.After the first digit is entered, the second digit blinks.

6.Continue entering digits for the number of seconds you want to set.

At the Kitchen Companion

1.Make sure the speakerphone is OFF (not in TALK mode).

2.Press the timer button.

3.The unit displays SET TIMER 00 MIN 00 SEC, and the first digit (minutes) blinks in the display.

4.Press CID VOL(-) arrow key to change the value of the blinking digit.

33

os6976-en1.p65 36 5/20/2005, 12:09 PM