Panasonic PT-AE700U operating instructions Before calling for service, Cleaning and maintenance

Before calling for service

Before calling for service, check the following points.

Problem	Possible cause	Page
Power does not	BThe power cord may not be connected.	–
turn on.	BThe MAIN POWER switch is turned off.	–
	BThe main power supply is not being supplied to the	–
	wall outlet.
	BTEMP indicator is illuminated or flashing.	48
	BLAMP indicator is illuminated or flashing.	49
	BThe lamp unit cover has not been securely	–
	installed.
No picture	BThe video signal input source may not be	–
appears.	connected properly.
	BThe input selection setting may not be correct.	25
	BThe “BRIGHT” adjustment setting may be at the	40
	minimum possible setting.
	BThe “SHUTTER” function may be in use.	45
The picture is	BThe lens cover may still be attached to the lens.	–
fuzzy.	BThe lens focus may not have been set correctly.	25
	BThe projector may not be at the correct distance	17
	from the screen.
	BThe lens may be dirty.	–
	BThe projector may be tilted too much.	17
The color is	B“COLOR” or “TINT” adjustment may be incorrect.	40,
pale or grayish.	BThe input source which is connected to the	41
		–
	projector may not be adjusted correctly.
The remote	BThe batteries may be weak.	–
control unit	BThe batteries may not be inserted correctly.	23
does not	BThe remote control signal receptor on the projector	23
operate.	may be obstructed.
	BThe remote control unit may be out of the	23
	operation range.
The picture does	BThe signal format (“TV-SYSTEM”) may not be set	42
not display	correctly.
correctly.	BThere may be a problem with the video tape or	–
	other signal source.
	BA signal which is not compatible with the projector	58
	may be being input.

Problem	Possible cause	Page
Picture from	BThe cable may be too long.	–
computer does	BThe external video output for the laptop computer	–
not appear.	may not be set correctly.
	(You may be able to change the external output
	settings by pressing the [Fn]+[F3] or [Fn]+[F10]
	keys simultaneously. The actual method varies
	depending on the type of computer, so refer to the
	documentation provided with your computer for
	further details.)

Cleaning and maintenance

Before carrying out cleaning and maintenance, be sure to disconnect the power cord plug from the wall outlet.

Wipe the cabinet with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a chemically-treated cloth, read the instructions supplied with the cloth before use.

Do not wipe the lens with a cloth that is dusty or which produces lint.

If any dust or lint gets onto the lens, such dust or lint will be magnified and projected onto the screen. Use a blower to clean any dust and lint from the maintenance lens surface, or use a soft cloth to wipe off any dust or lint.

andCare

54-ENGLISH ENGLISH-55