PICTURE menu
| BRIGHTNESS | |
COLOUR TEMPERATURE | ||
You can adjust the brightness in RGB colours |
You can adjust the white balance of the projected image. | individually. Press I H to increase/decrease |
| 1 point. |
Less | Less |
bluish | reddish |
Setting range:
DYNAMIC IRIS
You can switch automatic adjustment system of the lamp and the lens iris, which conrol the contrast and black level, on/off.
ON: | Automatic adjustment |
OFF: | No adjustment |
LIGHT HARMONIZER
The luminance sensor detects the brightness of the room and keeps the luminance in balance automatically. If needed, you can switch this function on/off from MODE, or adjust it manually from MANUAL by pressing I H.
Setting range: -8 to +8
NOTE:
•To assure correct performance of the LIGHT HARMONIZER, do not interrupt the light on to the luminance sensor. See “Projector body” on page 12.
RGB | Default setting |
BRIGHTNESS R | 0 |
BRIGHTNESS G | 0 |
BRIGHTNESS B | 0 |
Setting range:
COLOUR MANAGEMENT
You can manage your own defined colour settings. See “Setting your own colour profile” on page 24.
NR (Noise Reduction)
You can switch the automatic noise reduction system on/off. Press I H to select the required setting.
ON: Automatic noise reduction
OFF: No noise reduction
MPEG NR
You can switch the automatic noise reduction system for MPEG format images on/off. The system minimise block noise and mosquito noise to eliminate jagged edges, providing an overall smoother image. Press I H to select the required setting.
ON: Active
OFF: Deactive
ADVANCED MENU
You can perform more detailed image adjustment manually.
GAMMA
You can adjust linear intensity at 3 levels. Press I H to increase/decrease 1 point.
Levels | Default setting |
GAMMA HIGH | 0 |
GAMMA MID | 0 |
GAMMA LOW | 0 |
Setting range:
CONTRAST
You can adjust the amount of contrast in RGB colours individually. Press I H to increase/ decrease 1 point.
RGB | Default setting |
|
|
CONTRAST R | 0 |
|
|
CONTRAST G | 0 |
CONTRAST B | 0 |
Setting range:
NOTE:
•MPEG NR system is not available with COMPUTER/ HDMI (VGA480) signals.
CINEMA REALITY
You can switch the automatic image synchroniser on/off for 24 frames a second images, such as movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
NOTE:
•CINEMA REALITY is effective only with interlace signals.
Settings
