Wireless mouse
A wireless mouse function is provided. This function lets you use the remote control unit to control a personal computer in place of the personal computer’s mouse. This is done by connecting the projector to a personal computer using the mouse cable (6’7” (2.0 m) for PS/2 mouse) which is supplied with the projector. However, if you wish to use the wireless mouse function by connecting the projector to a personal computer which is not PS/2 compatible, you will need to purchase a separate mouse cable which is not included with the projector.
This projector is compatible with the following types of mouse only. Other types of mouse cannot be used. PS/2 mouse
Macintosh mouse Serial mouse
Example of connection
Computer
To mouse connector | |
| (male) |
Accessory mouse cable for PS/2 |
|
NOTE:
If using a computer which is not PS/2 compatible, please purchase a mouse cable that is suitable for the computer to be used.
Different mouse cables are used for different types of computers. Therefore, do not use any mouse cables other than the one supplied or a special mouse cable intended for this purpose.
The wireless mouse function operates only when input to the RGB 1 connector has been selected.
Operation
Pointer button | Click 1 button |
Click 2 button
Pointer button
While gently pressing the pointer button with your thumb, push the pointer button back and forward and to the left and right. The pointer (arrow) will move back and forward and to the left and right on the screen.
Pointer
Click 1 button
This button corresponds to the button on a
Click 2 button
This button corresponds to the right button on a standard mouse with two buttons.
