37
Basic Operation
36

Color Hue Setting (color

temperature)

This is used to adjust the white
areas of the picture if they appear
bluish or reddish.

COLOR

(S-VIDEO/VIDEO/YPBPRonly)
Press the Hbutton to make the
color more vivid in tone, and press
the Ibutton to make the color
more pastel in tone.

TINT

(NTSC/NTSC 4.43/YPBPRonly)
This adjusts the flesh tones in the
picture. Press the Hbutton to make
flesh tones more greenish, and
press the Ibutton to make the
flesh tones more reddish.

BRIGHT

This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the Ibutton if black areas are
too light (grey rather than black).

CONTRAST

This adjusts the contrast of the
picture. Press the Hbutton to make
the picture brighter, and press the
Ibutton to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)

SHARPNESS

Press the Hbutton to make the
picture details sharper, and press
the Ibutton to make the picture
details softer.
STANDARD

HIGH

LOW

STANDARD

HIGH

LOW

Noise Reduction (NR)

(When S-VIDEO/VIDEO/YPBPR
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the Hbutton. To turn it off , set
to “0” by pressing the Ibutton.

TV SYSTEM

(S-VIDEO/VIDEO only)
AUTO1The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.

AUTO1

AUTO2

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

SECAM

Select the item pressing the For G
buttons on the remote control unit or
the projector.
Press the Ior Hbuttons to set the
selective items. For the value
adjusting items, press the ENTER
button to display an individual
screen, and press the Ior H
buttons to adjust the setting.
Adjusting the picture
STANDARD

DYNAMIC

NATURAL

PICTURE MODE

Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular lighting conditions in use,
select STANDARD. For
exceptionally bright rooms, use
DYNAMIC.
PICTURE
PICTURE MODE
COLOR TEMP.
BRIGHT
CONTRAST
SHARPNESS
WHITE BALANCE R
WHITE BALANCE G
WHITE BALANCE B
STANDARD
STANDARD
STANDARD
32
32
6
32
32
32
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]