17
Preparation
16
<Connector panel>USB DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/PRVDSYNC/HDB/B-Y/PB
RGB3 IN
G/Y
'
& ( )%$#
, - .+
*
#USB port
(page 19)
The remote control unit can be
used as
a personal computer
mouse by connecting the
projector to
a personal computer
with the supplied USB cable.
(4-pin square connector)
$SERIAL connector
(pages 24, 25 and 56)
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
%RGB1 IN connector
(pages 24 and 25)
This connector is used to input
RGB signals and YPBPRsignals.
&RGB2 IN/RGB OUT connector
(pages 24 and 25)
This connector is used to input or
output RGB signals and YPBPR
signals. Use the RGB2 SELECT
item in the OPTION menu to
select whether you want input or
output with this connector.
'DVI-D IN connector
(page 25)
This connector is used to input
DVI-D signals.
(AUDIO OUT jack
(pages 24 and 25)
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
is connected to this jack, no
sound will be output from the
built-in speakers.
)S-VIDEO IN connector
(pages 24 and 42)
This connector is used to input
signals from a S-VIDEO-
compatible equipment such as a
video deck. The connector is S1
signal compatible, and it
automatically switches between
16:9 and 4:3 aspect ratios in
accordance with the type of
signal being input.
*AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks
(page 24)
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
+Remote control connector
(page 55)
This connector is used to control
the projector from the Remote
Control set up in Wired mode.
,RGB3 (YPBPR) IN connector
(pages 24 and 25)
This connector is used to input