47
Advanced Operation
NETWORK SETUP (PT-L780NTU only)
You need make adjustment on some items when controlling the projector
with a personal computer by means of the wireless or wired network, using
an optional wireless card or projector LAN card. Refer to the accessory CD-
ROM for details.
NETWORK
STATUS
WEP
LAN1
KEY1
SELECT:[^][@] ENTER:[ENTER]
ESC:[MENU]
SD CARD
AUTOPLAY
REPEAT
INTERVAL
OFF ON
1
5 sec
SELECT:[^][@]
ADJUST:[{][}]
ENTER:[ENTER]
ESC:[MENU]

STATUS

This setting is used to adjust the
LAN to control the projector by
means of the wireless or wired
network.

WEP

This setting is for encrypting data
transmitted by means of the
wireless network. (This item will not
be displayed when an optional
projector LAN card is used.)
SD CARD SETUP (PT-L780NTU only)
The following settings are used when projecting the pictures recorded in the
SD memory card. Refer to the accessory CD-ROM for details.

AUTO PLAY

Plays the pictures recorded in the
SD memory card automatically.

REPEAT

This setting is for adjusting the
times of the auto play.

INTERVAL

This setting is adjusting the interval
of the auto play.
46

WEB PASSWORD

(PT-L780NTU only)
You can set the password for
controlling the projector with a
personal computer by means of a
wireless or wired network using an
optional wireless or projector LAN
card. Use the For Gbuttons to
change the characters, and use the
Ior Hbuttons to change the
character position. When finished,
press the ENTER button. The
projector comes from the factory
without any password.
If password setting is complete, the
password will not be displayed on
the WEB PASSWORD screen.
When you forget it, set it again from
the beginning.

CONTROL KEY

To make the buttons on the
projector not function, set the
CONTROL KEY to “OFF”.
To use the buttons on the projector,
set to ON. (page 14)

FUNC 1

This assigns a function to the FUNC1
button of the remote control unit .
MUTE
B
Functions in the same way as the
MUTE function. (page 43)
KEYSTONE
BFunctions in the same way as
when “KEYSTONE” is selected
from the POSITION menu
screen. (page 40)

SET ID

SET ID is used to set projector IDs to
control two or more projectors either
simultaneously or separately.
“ALL”:The projectors can be
simultaneously controlled from
any remote control unit
regardless of their ID settings.
“1”: The projector can be controlled
from the remote control unit
with its projector ID set to “1”.
“2”: The projector can be controlled
from the remote control unit
with its projector ID set to “2”.
“3”: The projector can be controlled
from the remote control unit
with its projector ID set to “3”.
NOTE:
SET ID is set to “ALL “ by default.
Hence ID number need not be set
when only one projector is used.
If the projectors are given ID
numbers, their remote control units
must be assigned the same ID
numbers, respectively.
If the SET ID s of two or more
projectors are set to “ALL”, the user
will not be able to control them
separately.
The projector can be turned ON/OFF
from the remote control unit only if the
projector ID is set in the remote
control unit. For the details of
projector ID setting, see page 21.

AUTO POWER OFF

If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to “OFF”.
SET ID ALL
[
1
[
2
[
3
This feature will not function under
the following situation.
1) When the NETWORK or SD
CARD is selected (PT-L780NTU
only).
2) When using the freeze function.
3) When writing the data in the SD
memory card (PT-L780NTU
only).
NOTE:
While projector is connected to a
personal computer by means of a
wireless or wired network using an
optional wireless card or projector
LAN card with the WEB STANDBY
set to “ON”, the cooling fan operates
and the power indicator on the
projector flashes slowly in red.
(Refer to page 45)