Panasonic PT-L780NTU, PT-L780U Remote control unit, Projector control panel

Preparation

Remote control unit

#Power indicator

(pages 28, 29 and 45)

This indicator illuminates red when

the MAIN POWER switch is turned

on (standby mode), and illuminates

green when the power is turned on

and a picture starts to be projected.

(PT-L780NTU only)

When the WEB STANDBY is set

to "ON", the cooling fan operates

and the power indicator on the

projector flashes slowly in red.

$RGB INPUT indicator

This indicator illuminates when a

signal is input into the connector

that is selected with the input

select buttons.

%LAMP indicator (page 59)

This indicator illuminates when it is

time to replace the lamp unit. It flashes

if a circuit abnormality is detected.

&Input select (RGB, VIDEO)

buttons (page 28)

'TEMP indicator (page 58)

This indicator illuminates if an

abnormally high temperature is

detected inside the projector or

around it. If the temperature rises

above a certain level, the power

supply will be turned off

automatically and the indicator

will illuminate or flash.

(POWER button

(pages 28 and 29)

)AUTO SETUP button

(pages 28 and 60)

If this button is pressed while a

picture is being projected, the

projection settings will be

adjusted automatically in

accordance with the signal being

input. In addition, the angle of tilt

of the projector will be

automatically detected and

adjusted in order to correct any

keystone distortion. (“AUTO

SETUP” will appear on the

screen during adjustment.) Set

“AUTO KEYSTONE” in the

OPTION menu to “OFF” to

prevent any deterioration of the

picture as a result of keystone

correction. However, keystone

distortion may not be corrected

properly when using a lens that is

sold separately. Refer to page 40

for details on correcting keystone

distortion manually.

*SHUTTER button (page 44)

This button is used to

momentarily turn off the picture

and sound. However, keystone

distortion may not be corrected

properly when using a lens that is

sold separately. Refer to page 40

for details on correcting keystone

distortion manually.

+MENU button (pages 30 and 33)

This button is used to display the

menu screens. When a menu

screen is being displayed, this

button can be used to return to a

previous screen or to clear the

screen.

,Arrow (FFGGIIand HH) buttons

(page 33)

These buttons are used to select

and adjust items in the menu

screens.

*When in computer operating

mode, these buttons on the

remote control unit function

differently. (page 19)

-ENTER button (page 33)

This button is used to accept and

to activate items selected in the

on-screen menus.

*When in computer operating

mode, this button on the remote

control unit operates differently.

(page 19)

.FOCUS +/- buttons (page 29)

These buttons are used to adjust

the projected image focus.

/Zoom +/- buttons (page 29)

These buttons are used to adjust

the projected image size.

0Laser emitter (page 18)

1Infrared emitter (page 20)

2Click button (page 19)

This button can be used when the

operating mode select switch is

moved to the left (Computer).

3PAGE button (page 19)

This button can be used when the

operating mode select switch is

moved to the left (Computer).

4Operation indicator (page 18)

This indicator illuminates while a

laser beam is being emitted

(while the LASER button is being

pressed). It flashes when any

other buttons are being pressed.

5LASER button (page 18)

A beam of laser light is emitted while

this button is being pressed. This

laser beam can be used as a pointer

to point to something on the screen.

6FREEZE button (page 34)

This button is used to

momentarily freeze projection so

that a still picture is displayed.

7D.ZOOM +/- buttons (page 35)

These buttons are used to

enlarge the projected image.

8VOLUME +/- buttons

These buttons are used to adjust

the volume of the sound output

from the projector’s built-in

speakers. Refer to page 43 for

details on how to adjust the

volume using the buttons on the

projector control panel.

9FUNCTION (FUNC1) button

(pages 40, 43 and 46)

This button can be used for 1)

switching on and off the sound

volume and 2) entering into the

keystone distortion correction mode.

Use the FUNC1 item in the OPTION

menu to select which you wish to use.

:ID SET button (page 21)

This button is used to set the IDs

into the remote control unit when

using multiple projectors with a

single remote control unit.

;Operating mode (Computer,

Projector) select switch

(page 19)

Move this switch to the left side to

use the remote control unit to

operate a computer, and move it

to the right side to operate the

projector.

RGBVIDEOAUTO SETUP

ON(G)

STANDBY(R)

ENTER

POWER SHUTTER

INPUT

TEMP

LAMPRGB INPUT

– FOCUS +

– ZOOM +

POWER

RGB

VIDEO

R-CLICK

LASER

PAGE

ENTER

FREEZESHUTTER

FUNC1

Computer Projector

SETUP

AUTO

(

)

;

012

+,-

(

)

Projector control panel