25
Preparation
24
NOTE:
BIt is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
BRefer to the list of compatible signals on page 61 for the types of RGB
signals which can be input to the projector by connecting a computer.
BDo not input the signal to the RGB2 IN/RGB OUT connector when the
RGB2 SELECT item in the OPTION menu is set to OUTPUT. (Refer to
page 44.)
Example of connecting to computer
Refer to the accessory CD-ROM for details on connecting the
projector to a personal computer by means of a wireless or wired
network using an optional wireless card or projector LAN card.
(PT-L780NTU only)
Example of connecting to video equipments
USB DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/PRVDSYNC/HDB/B-Y/PB
RGB3 IN
G/Y
D-sub 15 (male) - BNC5 (female)
adapter cable (sold separately)
Red (connect to PRsignal connector)
Blue (connect to PBsignal connector)
Green (connect to Y signal connector)
Digital broadcast
tuner or DVD player
D-sub 9-pin
(male)
DVD player Audio system
Video deck
NOTE:
BOnly one audio system circuit is available for the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.
BOnly one audio system circuit is available for the RGB AUDIO IN jacks, so
if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
BIf an audio system is connected to the AUDIO OUT jack, the sound
volume balance can be controlled by the remote control unit which is
supplied with the projector.
BIf the video signal source is connected using a cable with a BNC
connector plug, use a BNC/RCA adapter (sold separately) to convert the
cable end to an RCA plug-type jack.
BRefer to page 61 for a list of compatible YPBPRsignals which can be input
to the projector.
BIf the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
Computer for
control use
DVD player
Red (connect to PRsignal connector)
Blue (connect to PBsignal connector)
Green (connect to Y signal connector)
USB DVI-D IN
REMOTE
SERIAL RGB1 IN RGB2 IN/RGB OUT AUDIO OUT
RGB AUDIO IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
R/R-Y/PRVDSYNC/HDB/B-Y/PB
RGB3 IN
G/Y
162345
ONDIP
D-sub 9-pin
(male)
Computer for
control use
Computer
Monitor
Audio system
Computer
Computer with
DVI-D OUT connector
DVI cable(Option)
(ET-SCDV03)