Setting up
Screen size and throw distance
You can adjust the projection size with 1.2x zoom lens. Calculate and define the throw distance as follows.
SH
Projected image
SW
Screen
88.6
|
|
|
|
|
|
|
|
|
|
| Started |
Projection size |
| Throw distance (L) |
|
| Throw distance (L) |
|
| ||||
|
|
|
|
|
| ||||||
(4 : 3) |
|
|
|
|
|
| |||||
Screen diagonal | Minimum distance | Maximum distance | Minimum distance | Maximum distance |
| Getting | |||||
(SD) | (LW) | (LT) |
| (LW) | (LT) |
| |||||
|
|
| |||||||||
33" | (0.84 m) |
|
| 1.1 m | (3'7") |
|
| 1.1 m | (3'7") |
|
|
40" | (1.02 m) | 1.1 m | (3'7") | 1.4 m | (4'7") | 1.1 m | (3'7") | 1.4 m | (4'7") |
|
|
50" | (1.27 m) | 1.4 m | (4'7") | 1.7 m | (5'6") | 1.4 m | (4'7") | 1.7 m | (5'6") |
|
|
| |||||||||||
60" | (1.52 m) | 1.7 m | (5'6") | 2.1 m | (6'10") | 1.7 m | (5'6") | 2.1 m | (6'10") |
|
|
70" | (1.78 m) | 2.0 m | (6'6") | 2.5 m | (8'2") | 2.0 m | (6'6") | 2.4 m | (7'10") |
|
|
80" | (2.03 m) | 2.3 m | (7'6") | 2.8 m | (9'2") | 2.3 m | (7'6") | 2.8 m | (9'2") |
|
|
90" | (2.29 m) | 2.6 m | (8'6") | 3.2 m | (10'5") | 2.6 m | (8'6") | 3.1 m | (10'2") |
|
|
100" | (2.54 m) | 2.9 m | (9'6") | 3.5 m | (11'5") | 2.9 m | (9'6") | 3.5 m | (11'5") |
|
|
120" | (3.05 m) | 3.5 m | (11'5") | 4.2 m | (13'9") | 3.5 m | (11'5") | 4.2 m | (13'9") |
|
|
150" | (3.81 m) | 4.4 m | (14'5") | 5.3 m | (17'4") | 4.3 m | (14'1") | 5.2 m | (17') |
|
|
200" | (5.08 m) | 5.9 m | (19'4") | 7.1 m | (23'3") | 5.8 m | (19') | 7.0 m | (22'11") |
|
|
250" | (6.35 m) | 7.4 m | (24'3") | 8.9 m | (29'2") | 7.3 m | (23'11") | 8.7 m | (28'6") |
|
|
300" | (7.62 m) | 8.8 m | (28'10") | 10.7 m | (35'1") | 8.7 m | (28'6") | 10.5 m | (34'5") |
|
|
* All measurements above are approximate and may differ slightly from the actual measurements.
Calculation methods for screen dimensions
You can calculate more detailed screen dimension from the screen diagonal.
Screen width (SW) and screen height (SH) |
|
SW (m) = SD (") x 0.0203 | SH (m) = SD (") x 0.0152 |
Minimum distance (LW) and maximum distance (LT) |
|
LT (m) = 0.0358 x SD (") - 0.047 | |
LT (m) = 0.0351 x SD (") - 0.044 |
* The results above are approximate and may differ slightly from the actual measurements.
NOTE:
•See “Screen size and throw distance for 16:9 aspect ratio” on page 49.
•Do not use the projector at a raised or a horizontally tilted position as it may cause
malfunction of the projector.
•You can tilt the projector body approximately ± 30° vertically. Overtilting may result in 
shortening the component’s life.
•For the best quality of the projection image, install a screen where sun light or room light does not shine directly onto the screen. Close window shades or curtains to block the lights.
