How to connect the HDMI input terminal

Recommended HDMI Connections

Follow the connection diagrams below for HDMI control of a single AV equipment such as a Panasonic DIGA-DVD recorder, RAM Theater or Player Theater system. Refer to page 68 for Setup Menu settings and additional control information.

• Optional HDMI and/or optical cables are not provided.

If connection (or setting) of equipment compatible with HDMI control is changed, switch the power of this unit Off then On again while the power of all equipment is On (to this unit to correctly recognize the connected equipment) and check that DIGA, RAM theater and Player theater playback operates.

edStart Getting

Connecting this unit to a DVD recorder, RAM theater or Player theater

 

• For DIGA:

 

- Connect with HDMI cable.

 

• For RAM theater and Player theater:

HDMI

- Connect with HDMI cable and audio

cable.

- Connect this unit’s AUDIO OUT (L&R) to listen to the TV program through the theater system.

Note:

• HDMI 1 is recommended. When connecting to HDMI 2, set the input mode to HDMI 2 (p. 37) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p. 68-69).

AUDIO

HDMI OUTHDMI OUT AUDIO IN

 

Or

DIGA

Panasonic RAM theater/

(Panasonic DVD Recorder)

Panasonic Player theater

Setting this unit after connections

After making connections as shown above, set “Ctrl with HDMI” (under “Other adjust”) first to “Off” and then “On” using the Setup Menu. (p. 68)

21