Warning Indicators
Indicator lights on the front of the unit alert you to the unit’s internal condition. (p. 10)
If the Lamp, Power, or Temp indicators flash, turn unit off and follow the directions below.
| Indicator | Symptom | Problem | Possible Solution | |
TEMP | Flashes red. | Power shuts off. | Internal overheat error. | Wait a while, then turn unit | |
Indicator | |||||
back on. | |||||
|
|
|
| ||
|
|
|
|
| |
POWER | Flashes orange 1 time. | Power shuts off. | Malfunction 1. | Contact service center.*1 | |
Indicator | |||||
|
|
|
|
| |
| Flashes orange 2 times. | Power shuts off. | Malfunction 2. | Contact service center.*1 | |
|
|
|
|
| |
| Flashes orange 3 times. | Power shuts off. | Malfunction 3. | Contact service center.*1 | |
|
|
|
|
| |
| Flashes orange 5 times. | Power shuts off. | Malfunction 4. | Contact service center.*1 | |
|
|
|
|
| |
| Flashes orange 6 times. | Power shuts off. | Malfunction 5. | Contact service center.*1 | |
|
|
|
|
| |
| Flashes orange 7 times. | Power shuts off. | The Lamp Cover is | Securely attach Lamp Cover. | |
| unsecured. | ||||
|
|
|
| ||
|
|
|
|
| |
| Flashes orange 8 times. | Power shuts off. | Malfunction 6. | Contact service center.*1 | |
|
|
|
|
| |
| Lights solid orange. | The screen isn’t | Malfunction 7. | Contact service center.*1 | |
| illuminated. | ||||
|
|
|
| ||
LAMP |
|
| Lamp will not light or light is | Try turning Power On several | |
Indicator | Flashes red 1 time. | Power shuts off. | times. If error persists, | ||
abnormal. | |||||
|
|
| contact service center. | ||
|
|
|
| ||
| Flashes red 2 times. | Dynamic iris off. | Malfunction 8. | Contact service center. | |
|
|
|
|
| |
| Flashes red 3 times. | Dynamic iris off. | Malfunction 9. | Contact service center. | |
|
|
|
|
| |
| Flashes red 4 times. | Dynamic iris error. | Malfunction 10. | Contact service center. | |
|
|
|
|
| |
| Lights solid red. | OSD appears every | Maximum Lamp life hours | Replace Lamp. | |
| time power is turned on. | exceeded. | |||
|
|
|
*1: Press unit POWER button down over 7 seconds. The POWER indicator goes out. Turn Power back On after 5 seconds. If the warning indicator still does not go out, please contact a service center.
Note:
•Once necessary steps have been taken, and before turning unit back On, be sure the unit has sufficiently cooled down. Especially if the unit was used for a long period, the lamp may take a while to cool down.
Information
75