ASPECT Controls

Changing the Aspect Mode

Lets you choose the aspect mode based on the format of the received signal and your preference.

The aspect mode changes each time ASPECT is pressed.

JUST4:3

FULLZOOM

•When an HD signal (1080i/720p) is received, the mode switches between FULL, H-FILL, JUST, and ZOOM.

FULLH-FILL

ZOOMJUST

•During PC input, the mode switches between 4:3 and FULL only.

4:3FULL

Notes:

•When a 1080p (HDMI) signal is received, the aspect is set to FULL and cannot be changed.

•When input mode is CARD, the aspect is set to 4:3 and cannot be changed.

•If the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected.

•If using this Projection Display in places, such as cafes or hotels, with the aim of displaying programs for a commercial purpose or for public presentation, please note that by using the aspect ratio (16:9) selection function to change the aspect ratio, you may be infringing on the rights of the original copyright owner of that program under copyright protection laws.

•If a 4:3 picture is projected in wide screen, distortion may occur around the edges so that part of the picture may no longer be visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be seen.

Mode

Picture

Explanation

JUST mode will display a 4:3 picture at maximum size, but

16with aspect correction applied

JUST

 

to the center of the screen

JUST

9

so that elongation is only

 

 

apparent at the left and right

 

 

edges of the screen. The size

 

 

of the picture will depend on

 

 

the original signal.

4:3

4

4:3 mode displays a 4:3

 

4:3

3

picture at the standard 4:3

 

 

size.

 

ZOOM

16

 

 

 

ZOOM mode magnifies the

ZOOM

 

9

 

central section of the picture.

 

 

 

16

 

FULL mode displays the

FULL

 

picture at maximum size,

FULL

9

but with a slightly elongated

 

 

 

 

appearance.

16

 

H-FILL mode enlarges a 4:3

H-FILL

 

 

 

H-FILL

9

image horizontally to the sides

 

of the screen. The side edges

 

 

 

 

of the image are cut off.

Operation Basic

41