Panasonic PV-C2063A Tape Operation, Index Search Program End Search, Search System is

Tape Operation

Search System is ...

Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.

Index Search

Program End Search

Go directly to the desired recording.

	INDEX SEARCH
ENTER	INDEX NUMBER :1
1 US I NG 1 -9		KEYS
FORW ARD		SEARCH	:FF
REVERSE	SEARCH		:REW

NEXT : SEARCH

EX I T: STOP

Press SEARCH* in Playback or Stop mode to display INDEX SEARCH screen,

and then	press
NUMBER Keys	to

select the recording number.

•To calculate number, see below.

Locates end point of recording for continuity.
Press SEARCH		twice in Playback
or Stop mode to display
1PROGRAM END SEARCH screen
.
2	PROGRAM	END SEARCH	Press FF	to
			start search.
SEARCH START		:FF
EX IT: SEARCH
Example of	Program End Search			operation.

Press FF or REW

to start search.

Fig.1		PLAYBACK DIRECTION
	Program 1		INDEX	Program 2 or BLANK

2 INDEX SEARCH

Play begins at search end. To search forward or

Press SEARCH button	End Point
	FF

FORW ARD SEARCH	:FF
REVERSE SEARCH	:REW

back 1 index,

press FF or REW

while screen left in displayed (10 sec.).

Fig.2

Program 1 BLANK INDEX Program 2

Press SEARCH button

FF

Fig.3 IfsearchexceedsafewsecondsinBLANKarea.

BLANK

End Point

■To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

	Press SEARCH button
Program 1	BLANK
	FF

End Point

INDEX Program 2

1 2 3 4 5 6 7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

	1	2		3	4	5	6	7
NOTE:			indicates start points of each recording.

Upon locating end point...

The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops.

Press SEARCH button

Notes

•Make each entry within 10 seconds, or the Index Search mode will be canceled.

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

Notes

•If Program End Search is started very close to an index mark, that mark may be skipped over.

•To cancel, press PLAY or STOP.

24

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com