Cable Box Universal Remote Control Feature

Universal Remote Control is...

The Remote Control may be set up to control some basic DSS or Cable box functions.

The Universal Remote Control Setup

1Find your DSS box or Cable box

Brand Code Number from one of the charts on the next page.

2

Setup remote.

 

 

Hold down DSS CABLE

and press

 

number keys

to enter code.

 

For code 100 or greater, first press 100 key, then the remaining digits. E.g. for 102, press 100, then press 0, and then press 2.

3Confirm code entry.

Press POWER * to turn selected unit ON or OFF.

• See below for controllable functions in each mode.

Notes

Please repeat the Universal Remote Control Setup after replacing remote control batteries.

The remote control will not operate all DSS receivers or Cable Boxes made by the manufactures listed. If you get no results, your particular brand cannot be controlled.

Using the Universal Remote Control

Once the remote control has been properly set up, you can select COMBO, DSS or CABLE mode depending on which functions you wish to control. (See below.)

Press COMBO or DSS CABLE

on the remote

control

to select

the desired mode. (See below for

 

buttons

available

in each mode.)

 

Set to COMBO:

All TV and VCR functions.

Set to DSS CABLE:

Basic VCR functions, e.g. PLAY, REC, etc.

CABLE/DSS functions, e.g. POWER, ENTER, number keys (except 100 key), CH UP/DOWN.

POWER

COMBO

DSS/ CABLE

NUMBER Keys

ENTER

32

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Page 32
Image 32
Panasonic PV-C2063A Universal Remote Control Setup, Using the Universal Remote Control, Universal Remote Control is