Panasonic PV-GS55 To disconnect USB cable safely, To start software in the ArcSoft Software Suite

With a PC

For Macintosh

1Turn on Computer and start up Macintosh.

2Insert supplied CD-ROM into the CD-ROM drive.

3Double click the icon of a CD-ROM that appears.

4Double click [ArcSoft].

5Double click [PhotoImpression] (or [PhotoBase] or [PanoramaMaker] or [PhotoPrinter]).

6Double click [English] or [French].

7Doubleclick[PhotoImpression Installer](or [PhotoBase Installer] or [PanoramaMaker Installer] or [PhotoPrinterInstaller]).

8Follow the instructions on the computer screen until the installation is complete.

ªTo start software in the ArcSoft

Software Suite

1Select [Start] >> [All Programs (Programs)] >> [ArcSoftSoftware Suite] >>

[Panorama Maker 3] (or [PhotoBase 4] or [PhotoImpression 4] or [PhotoPrinter4]).

For Information on ArcSoft Software:

TEL: 1-510-440-9901

Web Site: www.arcsoft.com

Refer to Help information about application operations and other Error messages.

To disconnect USB cable safely

If USB cable is disconnected while computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely.

1 Double click the icon in task tray.

≥Hardware disconnect dialog box appears.

2Select[USB Mass Storage Device]andclick [Stop].

3Verify [MatshitaDVC USB Device]is selected and click [OK].

≥You can safely disconnect the cable.

Note on the driver name displayed

The driver name displayed will differ depending on your OS, operating environment and the mode of the Palmcorder.

Windows XP/2000:

(When the Palmcorder is in Tape Recording mode or Tape Playback Mode:)

[Panasonic DVC USB-SERIAL Driver for Win XX (COM X)] (The numeral designation after

“Win XX” will differ depending on the OS. The numeral after “COM” will differ depending on the operating environment of your personal computer.)

(When the Palmcorder is in PC Mode:) [USB Mass Storage Device] or [Panasonic DV DISK Port Driver]

Windows Me:

(When the Palmcorder is in PC Mode:) [USB Disk]

≥Some OS, such as Windows 98SE, may not show the icon indicating that you may safely disconnect in task tray. (OS may be set not to show) Make sure Palmcorder’s Card Access Lamp is off and disconnect the cable. Also, with Windows Me, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode.

CAUTION:

If you disconnect the USB Cable while the Card Access Lamp is on, it may damage the Card data.

-57-