*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again.
AUDIO OUTPUT
Select the digital output to be output from the optical digital audio output connector of the unit.
1 Do steps 1 and 2 on page 48.
| ADD/DLT | CLEAR | |
|
| ||
AUDIO | ANGLE SUB TITLE DISPLAY | ENTER | |
TITLE | MENU | ||
SELECT | |||
|
|
S E T
SET
2 | DVD MAIN MENU | |
D I SC LANGUAGES | ||
AUDIO OUTPUT | : AUTO | |
ST I L L MODE | ||
| TV MODE | : 4 : 3 Pa n & S c a n |
SELECT | : |
SET | : SET |
END | : ACT I ON |
1)Press 
to select “AUDIO OUTPUT.”
2)Press SET to display screen.
ACTIONRETURN
ACTION
SKIP PLAY SKIP+
PAUSE | STOP | ZOOM |
| SLOW/SEARCH |
|
AUD I O OUTPUT
| LPCM(DVD) | : OFF | t r e a m |
| D o l b y D i g i t a l : B i t s | ||
3 d t s | : B i t s t r e a m | ||
| DRC | : OFF | |
| SELECT | : |
|
| SET | : SET | |
| END | : ACT I ON | |
1)Press 
to select an item.
2)Press SET repeatedly for output. (See below.)
Type of | Recommended setting | |||
amplifier | LPCM | Dolby |
| |
to be | dts | |||
(DVD) | Digital | |||
connected |
| |||
|
|
| ||
■“LPCM (DVD)” selections
OFF: Linear PCM of less than 48 kHz/16 bit is output. When playing DVDs recorded in linear PCM of over 48 kHz/20 bit, no digital audio is output. (Factory preset)
PCM: When playing DVDs recorded in linear PCM of 48 kHz/20 bit/24 bit or more, digital audio converted to 44.1 kHz/16 bit or 48 kHz/16 bit is output. (Digital output of PCM audio is restricted to48 kHz/16 bit or below for copyright protection.)
■“Dolby Digital” selections
Bitstream: Dolby Digital bitstream
PCM: When you have connected a amplifier that doesn’t have a
■“dts” selections
Bitstream: dts bitstream is output. (Factory preset)
PCM: When you have connected a amplifier that doesn’t have a
■“DRC (Dynamic Range Compression)” selections
OFF: Normal audio range is selected. (Factory preset)
ON: For dynamic sound even at low volume, this is useful for
Press ACTION to redisplay DVD MAIN MENU
4 and go to step 2 to setup another item. Or, press ACTION three times to exit.
No amplifier |
|
|
|
|
is connected |
|
|
|
|
|
|
|
|
|
AV amplifier |
|
|
|
|
without Dolby | PCM | PCM*1 | PCM*1 |
|
Digital/dts |
|
|
|
|
decoder |
|
|
|
|
|
|
|
|
|
AV amplifier |
|
|
|
|
including | PCM | Bitstream | PCM |
|
Dolby Digital |
| |||
|
|
|
| |
decoder |
|
|
|
|
|
|
|
| Advanced |
AV amplifier |
|
|
| |
including | PCM | Bitstream Bitstream*2 | ||
Dolby | ||||
Digital/dts |
|
|
| |
decoder |
|
|
| |
| Operation | |||
• Make settings according to amplifier | ||||
connected to optical audio output as shown | ||||
in above table. |
|
| ||
|
|
|
| |
*1 When connecting an amplifier (with an optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “PCM.” If “Bitstream” is selected, starting DVD play may cause such a high level of noise as to be harmful to your ears and damage the speakers.
*2 When a dts decoder is connected, please select “Bitstream” in “dts.” If “PCM” is selected, there will be stereo sound.
49
