Panasonic RX-ES23 ========== n, Recording the Radio, Track Skip so, ALL-REC # 1-REC # OFF

To	Operations
stop recording	Press [∫ TAPE/CD].
pause recording	Press [¥/;].
continue recording	1 Press [< CD] and replace
from another CD on	the CD.
the same cassette
	2 Press [¥/;].
	Press again to resume
	recording.
record selected tracks	1 Do step [1] and [2], then
	program the tracks. (l 9)
	2 Press [¥/;].
skip unwanted tracks	1 Press [¥/;] to pause
	recording. (The CD also
	pauses.)
	2 Turn [TIME/PRESET TUNE
	TRACK SKIP ] so the
	next track you want to record is
	displayed.
	3 Press [¥/;] to resume
	recording.

ALL-REC [CD-DA]

Records the whole CD or selected tracks. When the tape finishes before CD, recording and CD pauses for you to resume recording on the opposite side.

[1]Press [∫ TAPE/CD] to switch to CD mode.

[2]Press [CD REC MODE] to display “ALL-REC”.

Each time you press the button:

n ,ALL-REC # 1-REC # OFF ]

] ========== n

The display shows the tape length needed.

“C – – – –” indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not be recorded if the tape is not long enough.

[3]Press [< DECK] to open the deck and load a cassette with the side for recording facing up.

[4]Press [¥/;] to start recording.

The unit rewinds the tape, records 10 seconds of silence, and then starts recording.

To stop recording, press [∫ TAPE/CD]. The CD also stops.

If a track is interrupted at the end of the side facing up, Recording and CD pauses.

To	Operations
record the track again	1 Press [< DECK], flip the
on the opposite side	cassette, and insert it.

2Press [¥/;]*.

*The unit records 10 seconds of silence, and resumes recording from the beginning of the cut-off track.

Note:

≥Random play and repeat play cannot be used with

“ALL-REC”.

1-REC[CD-DA] [MP3]

Records a selected track from the CD and stops.

Preparation:

Wind on the tape to where you want to start recording.

[1]Press [∫ TAPE/CD] to switch to CD mode.

[2]Press [CD REC MODE] to display “1-REC”.

[3]Turn [TIME/PRESET TUNE TRACK SKIP ] to select the track you want to record.

[4]Press [¥/;] to start recording.

CD play and recording start at the same time.

To	Operations
stop recording	Press [∫ TAPE/CD].
	(The CD also stops.)
continue recording	1 Press [< CD] and replace the
from another CD	CD.
	2 Do steps [3] and [4].
record a track in play	1 Press [CD REC MODE] to
	display “1-REC”.
	2 Press [¥/;].
	Recording starts from the
	beginning of the track and stops
	when the track finishes.

Note:

≥Recording and CD will stop when the tape reaches its end, even if the track has not finished.

Recording the Radio

Preparation:

To record from the beginning of the tape; Wind on the leader tape.

To record from part or half way through the tape; Wind on the tape to where you want to start recording.

[1]Load a cassette with the side for recording facing up.

[2]Tune to the station.

[3]Press [¥/;] to start recording.

To	Operations
stop recording	Press [∫ TAPE/CD].
pause recording	Press [¥/;].
	Press again to resume recording.

To reduce noise when recording AM (Beat Proof function)

Remote control only

1Press [PLAY MODE] while recording. Each time you press the button:

bP1 ,-.bP2

Choose the setting with the least noise.

11

RQT7912