Use of Batteries, Power Sources, Memory Batteries

Use of Batteries

≥If this unit is not used for a long period of time or is used only from an AC power source, remove all the batteries to prevent potential damage due to possible battery leakage.

≥Align the poles (+ and –) correctly when inserting the batteries.

≥Do not mix old and new batteries or different types of batteries.

≥Do not recharge ordinary dry cell batteries.

≥Do not heat or disassemble the batteries. Keep them away from flame or water.

≥Do not keep together with metallic objects such as necklaces.

≥Do not use rechargeable type batteries.

≥Do not use batteries if the covering has peeled off.

Mishandling of batteries can damage other items, cause damage to the unit, and may cause a fire through short-circuiting or electrolyte leakage.

If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

Power Sources

FOR THE UNITED KINGDOM ONLY.

READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION.

To operate the unit on AC power (1)

Connect the AC mains lead.

1: Household AC outlet

2: AC mains lead (included)

To use batteries (not included) (2)

Disconnect the AC mains lead from unit to operate on battery power.

The remote control cannot turn the unit on when batteries are used.

To remove the batteries [A]

Open the battery cover, insert a finger into the hole in the bottom of the unit and push the batteries out.

Battery life

“ ” flashes on the display when the batteries are running down.

Then, the unit turns itself off and displays “U01”. Replace all the batteries with new ones.

Memory Batteries

Memory batteries retain memory (clock/timer/CD/radio settings) during power supply interruption.

These batteries do not power the unit. * Memory batteries are not included.

To replace the batteries (3)

≥The memory batteries last for about 1 year.

≥Connect the unit to AC power before replacing the batteries.

≥Extend the memory battery life by always pressing [] to turn the unit off before disconnecting the unit from the AC power source or replacing the power batteries.