The Sleep Timer, To turn the timer on, ================n

[4]Press [ PLAY/REC] to display the timer indicator.

Each time you press the button:

n , PLAY # REC # No display (OFF) ]

PLAY: to turn the play timer on

REC: to turn the record timer on

(The indicator does not appear if the start and finish times have not been set.)

“E” appears if the clock has not been set.

[5] Press [] to turn the unit off.

The unit must be off for timer to operate.

The record timer comes on about 30 seconds earlier than the set time.

A: When the unit is on to clear the timer indicators from the display. (The timer comes on at the set time everyday if the timer is on.)

B: The settings are shown in the following order:

Start time > Finish time > Music source > Volume

>Original display

*While the unit is in standby mode and connected to the household mains socket.

To change the settings (when unit is on)

You can enjoy your desired source after you have set the timer.

Turn the unit off before the timer’s start time.

Note:

≥The play and record timers cannot be used together.

The Sleep Timer

Remote control only

You can set the unit to turn off after certain time. (e.g. when you want to fall asleep while listening to music.)

Press [SLEEP] to select the time (minutes).

Each time you press the button:

n , SLEEP 30 # SLEEP 60 # SLEEP 90 ]
] === SLEEP OFF # SLEEP 120 ,=== n

To	Operations
cancel	Press [SLEEP] to select
	“SLEEP OFF”.

check the remaining	Press [SLEEP] once.
time	The remaining time is shown for
	about 5 seconds.

change the setting	Press [SLEEP] to select the new
	time.

Notes:

≥You can use sleep timer in combination with play and record timer.

≥Make sure the unit is off before the play and record timer’s start time.

≥Sleep-off time shall have higher priority than timer-off time.

RQT7912