Panasonic SC-AK250 Timer, Setting the clock, Using the play or record timer, Français, Lang

Timer

				Setting the clock
ESPAÑOL
	This is a 24-hour clock.
	1	Press [CLOCK / TIMER] to select “CLOCK”.
		Each time you press the button:
					CLOCK		˚ PLAY		˚ REC
	2					Original display
		(					)
			Within 8 seconds or so
		Press [4, / REW] or [¢,						/ FF] to set the time.
	3	Press [CLOCK / TIMER] to finish setting the time.
	Displaying the clock
	Press [CLOCK / TIMER] once when the unit is on or in standby
DANSK	mode.
	The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

FRANÇAIS

Timer

Action

Play timer

Prepare the music source you want to listen to;

cassette, disc number (1 ~ 5), radio or other

external equipments, and set the volume.

Record

Check the cassette’s erasure prevention tabs

timer

(\ page 12), insert the cassette and tune to the

radio station (\ page 13) or select the external

equipment (\ page 15 ~ 16).

1

Press [CLOCK/TIMER] to select the timer function.

Each time you press the button:

4

CLOCK ➞ ˚ PLAY

➞ ˚ REC

-

Original display

˚PLAY : to set the play timer

LANG

˚REC

: to set the record timer

(Proceed to the next step

within 8 seconds

)

2

Press [4, / REW ] or [¢,

/ FF] to set the

starting time.

Start time

1

Play timer indicator

Record timer indicator

- 5

3

Press [CLOCK / TIMER] to confirm.

4

Repeat steps 2 to 3 to set the finishing time.

LANG

Finish time

1

RQTV0196

14

RQT8043

To activate the timer

5 Press [ ˚PLAY/REC] repeatedly to turn on your desired timer.

˚ PLAY ➞ ˚ REC

no display (off)

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To	Action
change the	Repeat steps 1 to 4 and 6 (\ see left and
settings	above).
change the	1) Press [ ˚PLAY/REC] to clear the timer
source or	indicator from the display.
volume	2) Make changes to the source or volume.
	3) Perform steps 5 to 6 (\ see above).
check the	Press [CLOCK/TIMER] repeatedly to select
settings	˚PLAY or ˚REC.
cancel	Press [ ˚PLAY/REC] to clear the timer
	indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before turning the unit off.

Note:

•The play timer will start at the preset time with volume increasing gradually to preset level.

•The record timer will start 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, just activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] to select your desired time.

SLEEP 30 SLEEP 60 SLEEP 90

SLEEP OFF SLEEP 120

Sleep timer indicator

To cancel

Press [SLEEP] to select “SLEEP OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time and press [SLEEP] again to select your desired time.

Note:

•The play and sleep timer or the record and sleep timer can be used together.

•The sleep timer always has priority. Be sure not to overlap timer settings.

•The sleep timer turns off when you perform the record function.

RQTV0196-B.indd 14 2/23/07 4:49:32 PM