Panasonic SC-DK20 Play and record timers, Sleep timer, Press Sleep to select the time minutes

A

CLOCK/

TIMER

rPLAY/ rREC

B

	TV POWER	AUTO OFF		MIX 2CH	ACTION
SLEEP		SLEEP		DIMMER	MUTING
					DISC
	TV VIDEO
	TOP MENU		TV CH UP		MENU
	CH SELECT
			EN	TER
	TEST		TV CH DOWN
	GUI DISP				RETURN
	MARKER	SUB TITLE		AUDIO	ANGLE
	PL	CLEAR		A-B REPEAT
	S.SRND	PLAY MODE		REPEAT	SELECTOR
	3D AI	POSITION			DVD CD
	SOUND EQ	MEMORY

SUBWOOFERTAPE

SHIFT SLOWSEARCH TUNER

VOLUME

Using the timers

A The play and record timers

Turning the timers on and off

The selected timer comes on at the set time if the indicator (“rPLAY” or “rREC”) is on. The timer can be turned on and off by pressing [rPLAY/rREC].

Checking the timers

•	While the unit is on
	Press [CLOCK/TIMER] to select “rPLAY” or “rREC”.
	The set timer conditions are shown in the following order.
	Play timer:
	start time → finish time → source → volume
	Record timer:
•	start time → finish time → source
	While the unit is off	others
	Press [CLOCK/TIMER].
	The clock and the indicator for the timer that is on are shown.
Playing the unit after the timers are set		and
The unit can be used after the timers are set.
Check the following before turning the unit off again.		Timer
If playing tapes or making a recording:

Reset tape direction.

If playing discs:

Make sure the desired disc is selected.

Note

•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

•If the unit is on, the timer will not function. The unit must be in the standby mode.

•If AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source. If you want to playback or record from a connected unit, set the other unit’s timer to the same time. (See the other unit’s instruction manual.)

•The record timer cannot be used with DVDs and Video CDs.

•The timer cannot be used to start the CD MANAGER or program play.

B The sleep timer

Remote control only

This timer turns the unit off after a set time.

AUTO OFF

SLEEP

SLEEP

Press [SLEEP] to select the time (minutes).

Each time you press the button:

SLEEP 30 → SLEEP 60 → SLEEP 90
→	SLEEP OFF → SLEEP 120
		→

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

To confirm the remaining time

While the timer is functioning

Press [SLEEP].

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to display the remaining time, then press again to select the required time.

Using the timers together

The play and sleep timers or the record and sleep timers can be
used together.
The sleep timer always has priority. Be sure not to overlap timer
settings.	45
The play and record timers cannot be used together.

RQT6345