Setting the clock, Play timer, Sleep timer

Timer

Setting the clock

This is a 12-hour clock.

Press [CLOCK/TIMER] to set the clock.

Press [u/t] or [y/i] to select the time within 5 seconds. (Press and hold to change the time faster.)

Press [CLOCK/TIMER] again.

g To display the clock for few	Press [CLOCK/TIMER]
seconds when the unit is on or in
standby mode

Note

Reset the clock regularly to maintain accuracy.

Play timer

You can set the timer to come on at a certain time to wake you up. This unit offers 3 optional play timers.

Preparation:

•Turn the unit on and set the clock. (➡ see above)

•Prepare the music source (disc, radio, iPod or AUX) and set the volume.

Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY 1 zPLAY 2 zPLAY 3

Original display

Within 5 seconds, press [u/t] or [y/i] to set the starting time.

Start time

Play timer indicator “ON” is displayed

Press [CLOCK/TIMER] to confirm.

Repeat steps 2 and 3 to set the finishing time.

Finish time

Play timer indicator “OFF” is displayed

To activate the timer

Press [z, PLAY] repeatedly to turn on your desired play timer.  Press [^] to turn off the unit.

RQTX0250

To	Action

change the settings	Repeat steps 1 to 4 and 6.

change the source or	 Press [z, PLAY] to clear zPLAY indicator
volume	from the display.
	 Make changes to the source or volume.
	 Perform steps 5 and 6.

check the settings	Press [CLOCK/TIMER] repeatedly to select
(when the unit is on or	zPLAY 1, zPLAY 2 or zPLAY 3.
in standby mode)

cancel	Press [z, PLAY] to clear the timer indicator
	from the display.

Note

•The timer will start at the preset time, with the volume increasing gradually to the preset level.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while the timer is functioning, the finish time setting will not be activated.

•When external unit is selected as the source when the timer comes on, the system turns on and engages external unit as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)