Settings
Change the settings to suit your equipment | MENU | TUNE | |
to the environment in which you are using | |||
SETUP | ENTER | ||
it. Before making any changes, read the | Switch on. |
| |
descriptions of the settings, note the factory | RETURN |
| |
settings and ranges, and refer to the |
|
| |
equipment's instructions. |
|
|
Display
MENU TUNE
SETUP ENTER
RETURN
SETUP MIC
1Enter the setup mode.
MENU
SETUP
RETURN
Press and hold.
2Select the item you want to change.
TUNEENTER
2a Select and press [ENTER].
DISTANCE ↔ AUTO SETUP ↔ INPUT MODE ↔ HDMI ↔ DRCOMP ↔ ATTENUATOR ↔ REMOTE ↔ TV DELAY ↔ RESET ↔ EXIT
•Refer to pages 13 and 14 for each item settings.
•For “REMOTE”, refer to page 22.
•For “RESET”, refer to page 20.
2b Select and press [ENTER].
3 Change the | 4 Exit the |
setting. | setup mode. |
| MENU |
TUNE | SETUP |
| |
| RETURN |
Press to change the | Press repeatedly |
setting. | until “EXIT” appears. |
ENTER | ENTER |
Press once to enter. | Press [ENTER] to |
| completely exit the |
| setup mode. |
Settings
Distance | • Enter the distance of the front, center and surround speakers from |
| the seating position. |
Change the distance so that the sound from all the speakers (except for the subwoofer) reaches you at the same time.
You can select distances between 1.0 and 10.0 m.
The factory settings are: L, R (front): | 3.0 m (meters) |
C (center): | 3.0 m (meters) |
SL, SR (surround): 1.5 m (meters)
Auto setup • Reset the settings done in auto speaker setup.
YES: Reset all auto speaker setup settings
NO: To cancel (factory setting)
Input mode • This unit automatically detects whether input is digital or analog, but you can fix the input mode.
AUTO: The unit automatically detects whether input is digital or analog.
ANALOG: Select to make the unit accept analog input.
DIG: Select to make the unit accept digital input.
PCMFIX1: Select to input to PCM.
2a | 2b | 3 |
|
|
|
DISTANCE | L |
|
R
C1.0m to
10.0m
SL
SR
Repeat for each speaker channel
AUTO SETUP | DEFAULT | NO |
|
| YES |
|
|
|
|
|
|
INPUT MODE | TV |
|
|
| AUTO |
| DVR | ANALOG |
|
| DIG |
|
| PCMFIX |
| DVD | |
|
| |
|
|
|
1In rare cases, the unit may have trouble recognizing PCM signals and this may cause the beginnings of tracks to be cut off. Select “PCMFIX” if this occurs.
•With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs.
To engage the DTSFIX mode:
Press and hold
To cancel the DTS FIX mode:
Press and hold
The mode cancels when input mode is set to AUTO or when the unit is turned off.
Note
When a FIX mode is on, the unit cannot process other signals. This may cause noise to be output. If this occurs, select an input mode other than PCMFIX, or cancel the DTSFIX mode.
RQTV0225
13
(continue on next page)
8/17/2007 4:20:14 PM