![Remote control operation guide](/images/new-backgrounds/11438/1143843x1.webp)
Remote control operation guide
Changing the remote control code
Change the code if you find the remote control unintentionally also controls other Panasonic equipment. Do the following to set the remote control code and this unit’s remote control mode to the same one.
MENU TUNE
SETUP
ENTER
Change the main unit’s mode
1. Enter the SETUP menu.
MENU
SETUP
Press and hold .
RETURN
2. Select and press [ENTER].
Change the remote control’s code
TUNER
5.Press .
BAND
6. While pressing | OK | , press and |
|
RETURN
3. Select and press [ENTER].
MENU TUNE
SETUP
ENTER
RETURN | 4. Press |
SETUP MIC | repeatedly to select “EXIT” and |
| press [ENTER]. |
hold 2 for about 2 seconds.
To restore the code to “1”
•On the main unit: In step 3, select “1”.
•On the remote control: In step 6, while pressing [OK], press and hold [1] for about 2 seconds.
Specifications (DIN 45 500)
g AMPLIFIER SECTION
| RMS output power of each channel driven | ||
guide/Specifications | 10 % total harmonic distortion |
| 150 W per channel (6 Ω) |
100 Hz subwoofer CH |
| ||
| 1 kHz front CH |
| 125 W per channel (3 Ω) |
| 1 kHz surround CH |
| 125 W per channel (3 Ω) |
| 1 kHz center CH |
| 250 W per channel (6 Ω) |
| 100 Hz subwoofer CH |
| 250 W per channel (6 Ω) |
| Total RMS output power |
| 1000 W |
| Rated minimum sine wave RMS power output | ||
| 1% total harmonic distortion (Dolby Digital mode) | ||
| 1kHz front CH |
| 75 W per channel (3 Ω) |
| 1kHz surround CH |
| 75 W per channel (3 Ω) |
| 1kHz center CH |
| 150 W per channel (6 Ω) |
operation | Total RMS output power |
| 600 W |
Total harmonic distortion |
| 0.5 % (3 Ω) | |
| Half power at 1 kHz (Front CH) |
| |
| Input sensitivity |
|
|
|
| 450 mV, IHF'66 | |
control | S/N at rated power (3 Ω) |
|
|
| 80 dB (85 dB, IHF'66) | ||
|
| ||
| Input impedance |
| 47 kΩ |
|
| ||
Remote | Tone controls |
|
|
BASS |
| 50 Hz, +6 to | |
| TREBLE |
| 20 kHz, +6 to |
|
|
|
|
| Digital input OPTICAL |
| 2 |
| COAXIAL |
| 1 |
| HDMI Input |
| 2 |
| HDMI Output |
| 1 |
|
|
|
|
|
|
|
|
| Wireless Ready |
| |
|
|
|
|
| g FM TUNER SECTION |
|
|
| Frequency range |
| 87.50 MHz to 108.00 MHz |
| Sensitivity |
| 1.9 µV/75 Ω |
| S/N 30 dB |
| |
| S/N 26 dB |
| 1.8 µV/75 Ω |
| S/N 20 dB |
| 1.6 µV/75 Ω |
| IHF usable sensitivity |
| (IHF '58) 2.2 µV/75 Ω |
| IHF 46 dB stereo quieting sensitivity | 22 µV/75 Ω | |
| Total harmonic distortion |
|
|
| MONO |
| 0.2% |
| STEREO |
| 0.3% |
| S/N |
|
|
| MONO |
| 60 dB (71 dB, IHF) |
| STEREO |
| 58 dB (65 dB, IHF) |
| Frequency response |
| 20 Hz to 15 kHz, +1 dB, |
| Image rejection at 98 MHz |
| 40 dB |
| IF rejection at 98 MHz |
| 70 dB |
RQTV0225 | Stereo separation (1 kHz) |
| 40 dB |
Antenna terminal |
| 75 Ω (unbalanced) | |
|
| ||
| g AM TUNER SECTION |
|
|
| Frequency range | 522 kHz to 1611 kHz (9 kHz steps) | |
22 | Sensitivity | 530 kHz to 1620 kHz (10 kHz steps) | |
| 500 µV/m | ||
| Selectivity (at 999 kHz) |
| 30 dB |
g SPEAKER SECTION Front speaker
Type | 1 Way, 1 Speaker |
Speaker unit |
|
Full range | 6.5 cm cone type |
Input power (IEC) | 125 W (Max/3 Ω) |
Output sound pressure level | 80 dB/W (1.0 m) |
Frequency range | 76 Hz to 25 kHz |
Dimensions (W x H x D) | 89 Hz to 22 kHz |
252 mm x 1123 mm x 235 mm | |
Mass | 3.7 kg |
Surround speaker |
|
Type | 1 Way, 1 Speaker |
Speaker unit |
|
Full range | 6.5 cm cone type |
Input power (IEC) | 125 W (Max/3 Ω) |
Output sound pressure level | 80 dB/W (1.0 m) |
Frequency range | 95 Hz to 25 kHz |
Dimensions (W x H x D) | 120 Hz to 22 kHz |
92 mm x 142 mm x 95 mm | |
Mass | 0.6 kg |
Center speaker |
|
Type | 2 Way, 2 Speakers |
Speaker unit |
|
Full range | 6.5 cm cone type x 2 |
Input power (IEC) | 250 W (Max/6 Ω) |
Output sound pressure level | 82 dB/W (1.0 m) |
Crossover frequency | 5 kHz |
Frequency range | 80 Hz to 25 kHz |
Dimensions (W x H x D) | 96 Hz to 22 kHz |
270 mm x 94 mm x 95 mm | |
Mass | 1.3 kg |
Subwoofer |
|
Type | 1 Way, 1 Speaker |
Speaker unit (Woofer) | 16 cm cone type |
Output sound pressure level | 81 dB/W (1.0 m) |
Frequency range | 31 Hz to 220 Hz |
Dimensions (W x H x D) | 37 Hz to 180 Hz |
153 mm x 415 mm x 257 mm | |
Mass | 3.6 kg |
g GENERAL |
|
Power supply | AC 230 V to 240 V, 50 Hz |
Power consumption | 135 W |
Dimensions (W x H x D) | 430 mm x 105 mm x 388 mm |
Mass | 4.1 kg |
|
|
Power consumption in standby mode: | 1 W |
|
|
Notes:
1.Specifications are subject to change without notice.
2.Total harmonic distortion is measured by the digital spectrum analyzer.
8/17/2007 4:20:35 PM