Other speaker setup options
■Fitting optional speaker stands (not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
• The stands must be able to support over 10 kg. |
|
• The stands must be stable even if the speakers |
|
are in a high position. | Metal screw holes |
| For attaching to speaker stands |
■ Attaching to a wall | 5 mm, pitch 0.8 mm |
|
Plate thickness plus 7 mm to 10 mm
Speaker stand
(not included)
Speaker setup STEP 1
You can attach the surround, center and front speakers to a wall.
1 | Drive the screw (not included) into the wall | 2 | Fit the speaker securely onto the screw(s) with the hole(s). |
| At least 30 mm |
Ø4.0 mm | Ø7.0 to 9.4 mm |
Wall or pillar | 4.0 to 6.0 mm |
|
Note
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Front speakers
Attach to a wall without the base and stand.
384 mm
Center speaker
190 mm
Surround speaker
■Reattach the speaker cable
1 Insert the cable from bottom.
Leave about 80 mm
2Pull out the
cable through the hole.
Wireless system connection
Set your sound free with Panasonic’s wireless receiver and speaker systems
Attach the
You can also connect your portable audio equipment to the wireless
Digital transmitter cover
PUSHPUSH
DIGITAL
PUSHPUSH
system.
For details, refer to the operating instructions for 
Note
Remove the digital transmitter cover before installing any optional
Push!
TRANSMITTER
Push!
RQTV0225
Panasonic wireless accessory.
• Replace the cover when the digital transmitter is not in use.
You can use the blunt end of a writing instrument | 7 |
to push here until the cover pops out. |
|
8/17/2007 4:20:01 PM 
