∫ “Audio” tab
Dynamic Range Compression | ≥Off |
|
| ≥On: | Adjusts for clarity even when the volume is low by compressing the range of the lowest sound |
|
| level and the highest sound level. Convenient for late night viewing. (Only works with Dolby |
|
| Digital) |
|
|
|
Audio during Search | ≥On |
|
| ≥Off |
|
|
|
|
Speaker Setting (‹ below) | ≥Center: | 0.0/1.0/2.0/3.0/4.0/5.0 ms |
Set the delay time for your center and | ≥Surround (L/R): 0.0/5.0/10.0/15.0 ms | |
surround speakers. |
|
|
|
|
|
∫“Display” tab
Menu Language |
| ≥English |
|
| |
§5 | ≥ |
|
| ||
| §6 | ≥English | ≥Français ≥Deutsch | ≥Italiano ≥Español ≥Português ≥Svenska ≥Nederlands | |
| ≥On |
| ≥Off |
| |
|
|
|
|
|
|
§5 [Southeast\Asia] |
|
| §6 | [Except\Southeast\Asia] | |
∫ “Others” tab
FL Dimmer | ≥Bright | ≥Dim |
| ≥Auto: The display is dimmed during play, but brightens when you perform some operations. | |
|
|
|
HighMAT | ≥Enable |
|
| ≥Disable (Unable to use the HighMAT function) | |
|
|
|
QUICK SETUP | ≥Yes | ≥No |
| ≥Yes: The password screen is shown if Ratings (‹ page 20) are set. Please enter the same | |
This returns all values in the Setup | password. After “INIT” on the display disappears, turn the unit off and on again. | |
menus to the default settings. | ≥No |
|
|
|
|
Changing the player settings
Changing the delay time (Speaker Setting)
(Effective when playing
(Center and surround speakers only)
For optimum listening with
| Center delay time |
|
| |
| L | ms | C | R |
|
| 0.0 |
|
|
Exit | Exit |
|
| SW |
|
|
|
| |
| LS |
| ms | RS |
|
| 0.0 | ||
|
|
|
| |
Surround delay time
1Press [3 4] to select the delay time box and press [ENTER].
2Press [3 4] to adjust the delay time and press [ENTER].
a Center speaker
Difference | Setting |
|
|
Approx. 34 cm | 1.0 ms |
|
|
Approx. 68 cm | 2.0 ms |
|
|
Approx. 102 cm | 3.0 ms |
|
|
Approx. 136 cm | 4.0 ms |
|
|
Approx. 170 cm | 5.0 ms |
|
|
b Surround speakers |
|
|
|
Difference | Setting |
|
|
Approx. 170 cm | 5.0 ms |
|
|
Approx. 340 cm | 10.0 ms |
|
|
Approx. 510 cm | 15.0 ms |
|
|
To finish the speaker setting
Press [2] to select “Exit” and press [ENTER].
When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic II.
e.g., the settings for MUSIC and PANORAMA are the same as those for Dolby Digital.
If either distance a or b is less than c, find the difference in the relevant table and change to the recommended setting.
: Recommended placement
L C 
R
a c
SW
b
LS RS
Dolby Digital |
| Dolby Pro Logic II |
| ||
|
|
|
|
| |
MUSIC |
| MOVIE |
| PANORAMA | |
|
|
| |||
|
|
|
|
|
|
0 ms | 0 ms |
| 10 ms |
| 0 ms |
|
|
|
|
|
|
5 ms | 5 ms |
| 15 ms |
| 5 ms |
|
|
|
|
|
|
10 ms | 10 ms |
| 20 ms |
| 10 ms |
|
|
|
|
|
|
15 ms | 15 ms |
| 25 ms |
| 15 ms |
|
|
|
|
|
|
RQT7436
21
