10 RQT9841
Step 2 Placement
Supplied accessories
Additionally required accessories (commercially available)
≥Fall prevention cord ......................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord)................................................................................ k 2
≥Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs).
≥Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)).
Attach the cord to the main unit.
When placing the main unit in a rack or on a
table
≥Place the main unit on a flat and horizontal surface.
∏2 Basic stands ∏2 30o stands
∏2 80o stands ∏2 Screws with
washer
ACord§
§ If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).
SC-HTB170P_RQT9841-P.book Page 10 Friday, January 25, 2013 2:48 PM