Panasonic SC-HTB170 - page 24

24 RQT9841

You can select different modes to suit the type of

connections with emphasis on connectivity or high quality

audio.

≥Make sure that a Bluetooth® device is already paired

with this system. (>19)

Press [ ] to select “ ”.

≥“” indicator will blink slowly. If the indicator lights, a

Bluetooth® device is already connected with this system.

Disconnect it. (>19)

Press [ ] to display the current

mode.

While the mode is displayed, press

[ ] to select the mode.

≥The setting changes each time [ ] is pressed.

≥The indicator for the selected setting blinks for 10 sec and

then exits the setting mode.

≥The setting is maintained until it is changed again.

Depending on your preference, It is possible to turn off the

3D surround effect and the clear-mode dialog effect.

While pressing and holding [SOUND]

on the remote control, press and

hold [VOL i] on the main unit for

more than 4 sec.

While the setting is displayed, press

[SOUND] to change the setting.

≥The setting changes each time [SOUND] is pressed.

≥The indicator for the selected setting blinks for 20 sec and

then exits the setting mode.

≥

This setting will be reset to on when the main unit is turned off.

≥When off is selected, the dialog effect level cannot be

adjusted.

You can turn off dimmer mode and keep the LED

indicators bright.

While pressing and holding [INPUT

SELECTOR] on the remote control, press

and hold [sVOL] on the main unit for

more than 4 sec to turn off Dimmer mode.

≥The indicator for the current condition will turn brighter.

≥The setting is maintained until it is changed again.

≥Default setting of this function is on.



To turn on dimmer mode, repeat the operation above.

After performing the operation, the indicator for the current

condition will be dim.

Bluetooth® communication

mode

“STANDARD” indicator blinks:

MODE1 (Factory preset)

Emphasis on connectivity

“STEREO” indicator blinks:

MODE2

Emphasis on audio quality

Using the Dolby Virtual

Speaker effect

“STANDARD” indicator blinks:

3D surround effect and clear-mode

dialog effect is on.

“STEREO” indicator blinks:

3D surround effect and clear-mode

dialog effect is off.

Dimmer mode

SC-HTB170P_RQT9841-P.book Page 24 Friday, January 25, 2013 2:48 PM

Contents

Main 2012/12/21 P RQT9841-P Owners Manual Home Theater Audio System Model No. SC-HTB170 Included Installation Instructions IMPORTANT SAFETY INSTRUCTIONS Unit AC power supply cord Button-type battery (Lithium battery) WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN FCC Note: 4 Table of contents Before use Getting started Operations Reference Supplied items This system Accessories Control reference guide This system (Front) This system (Rear) Before use Remote control Before using for the first time To replace a button-type battery Remote control operation range 8 Step 1 Selecting the placement method When attaching the main unit to a wall The main unit When placing the main unit in a rack or on a table Safety Precautions Caution When placing the main unit in front of the TV If the TVs remote control sensor is blocked by the main unit Wireless interference 10 Step 2 Placement Attach the cord to the main unit. Supplied accessories Additionally required accessories (commercially available) When placing the main unit in a rack or on a table [A] : With basic stands [B] 12 Supplied accessories Additionally required accessories (commercially available) Locate the screwing positions on the wall. When attaching the main unit to a wall Attach the wall mount brackets to the wall. Complete all the necessary connections to the main unit. (>15 to 18) Attach the cord to the main unit. Attach the main unit to the wall mount brackets. Screw the safety holder onto the wall mount brackets. Secure the cord to the wall. Step 3 Connections HDMI Verify if the TVs HDMI terminal is labelled HDMI (ARC). What is ARC? Make the connection. Connection from an HDMI compatible device HDMI standby pass-through 3D compatibility Page AC power supply cord connection Bluetooth connection Using this system Press [] to turn on the main unit. Select the source. When is selected as the source When BD/DVD is selected as the source Adjust the volume and sound effect level. To adjust the volume of this system 3D sound To select the sound mode Sound modes Linked operations with the TV (VIERA LinkTM HDAVI ControlTM) When the connection or settings are changed, repeat this procedure. Speaker control Home theater TV Advanced operations Page Operations Remote control code Others Preparation To reduce the clear-mode dialog effect To turn off VIERA Link HDAVI Control Troubleshooting HDMI General operation Pairing cannot be done. The device cannot be connected. Bluetooth Sound About Bluetooth Frequency band used Certification of this device Restrictions of use Range of use Indicator illumination Specifications AMPLIFIER SECTION TERMINAL SECTION SPEAKER SECTION GENERAL Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) SC-HTB170P_RQT9841-P.book Page 31 Friday, January 25, 2013 2:48 PM As of October 2012 Panasonic Products Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) RQT9841-P