Getting started
RQT9841 19
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from
this system wirelessly.
Preparation
≥Turn on the Bluetooth® feature of the device and place the device near the main unit.
Press [ ] to select “ ”.
≥If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ”
indicator flashes quickly.
≥If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB170” from the
Bluetooth® device’s Bluetooth®
menu.
≥If prompted for the passkey on the Bluetooth® device, enter
“0000”.
≥Once the Bluetooth® device is connected, the “ ” indicator
stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Press [ ] to select “ ”.
≥If the “ ” indicator lights, a Bluetooth® device is already
connected with this system. Disconnect it. (>below)
Select “SC-HTB170” from the
Bluetooth® device’s Bluetooth®
menu.
∫Disconnecting a Bluetooth® device
Press and hold [ ] until the “ ” indicator flashes
slowly.
≥When “ ” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth® device.
≥The Bluetooth® device will be disconnected if a different
audio source (e.g. “TV“) is selected.
≥Refer to the operating instructions of the Bluetooth® device
for further instruction on how to connect a Bluetooth®
device.
≥This system can only be connected to one device at a time.
≥To change the sound quality, refer to “Bluetooth®
communication mode” on page 24.
Bluetooth® connection
Bluetooth® pairing Connecting a Bluetooth®
device
SC-HTB170P_RQT9841-P.book Page 19 Friday, January 25, 2013 2:48 PM