Panasonic SC-HTB170 Attach the main unit to the wall mount brackets., Screw the safety holder onto the wall mount brackets., Secure the cord to the wall.

14 RQT9841
Attach the main unit to the wall mount brackets.
Screw the safety holder onto the wall mount brackets.
≥Screw tightening torque: 80 N0cm (0.6 lbf0ft) to 120 N0cm (0.9 lbf0ft).
≥The safety holders are designed to prevent the main unit from falling off the wall mount bracket.
Secure the cord to the wall.
≥Make sure that the slack of the cord is minimal.
AWall mount bracket (supplied)
BGently move the main unit down onto the wall mount bracket.
CScrew without washer (supplied)
DSafety holder (supplied)
EWall mount bracket (supplied)
FWall
GAbout 15o
≥Tilt about 15o from the wall and tighten the screw.
HScrew eye
ICord













SC-HTB170P_RQT9841-P.book Page 14 Friday, January 25, 2013 2:48 PM