Panasonic SC-MAX370 One-TouchConnection Connecting by NFC, Bluetooth standby mode, Link mode

One-Touch Connection (Connecting by NFC)

For NFC-compatible AndroidTM devices only

Simply by touching an NFC (Near Field Communication)-compatible Bluetooth® device by the unit, you can complete all preparations, from registering a Bluetooth® device to establishing a connection.

Preparation

•Turn on the NFC feature of the device.

•Android device version lower than 4.1 requires the installation of the app “Panasonic MAX Juke” (Free of charge).

1Enter “Panasonic MAX Juke” in the search box of Google PlayTM to search, and then select “Panasonic MAX Juke”.

2Start the app “Panasonic MAX Juke” on the device. -Follow on-screen instructions on your device. -Always use the latest version of the app.

1 Press [, MEMORY] (main unit:

[/MEMORY,-PAIRING]) to select “BLUETOOTH”.

2Touch and hold your device on the NFC touch area of this unit [ ].

Note:

•If you touch another device to this unit, you can update the Bluetooth® connection. The previously connected device will be disconnected automatically.

•If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable (not supplied).

•When the connection is established, the playback may start automatically depending on the type of device being used.

•The One-Touch Connection may not work properly depending on the type of device being used.

Bluetooth® standby mode

If you enable this function, even when the main unit is turned off, it will turn on automatically when a Bluetooth® device sends a connection request.

1Press [, MEMORY] (main unit:

[/MEMORY,-PAIRING]) to select “BLUETOOTH”.

2Press [PLAY MENU] to select “STANDBY MODE”.

3Press [2, 1] to select “ON STANDBY MODE” or “OFF STANDBY MODE” and then press [OK].

Link mode

You can change the transmission speed to prioritize transmission quality or sound quality.

Preparation

If this system is connected to a Bluetooth® device, disconnect it (> “Disconnecting a device”).

1Press [PLAY MENU] to select “LINK MODE”.

2Press [2, 1] to select “MODE 1” or “MODE 2” and then press [OK].

•MODE 1

Emphasis on connectivity.

•MODE 2

Emphasis on sound quality.

Note:

The default setting is “MODE 2”.

Disconnecting a device

1Press [PLAY MENU] repeatedly to select “DISCONNECT?”.

2Press [2, 1] to select “OK? YES” and then press [OK].

Bluetooth® device

•Once the registration and connection of the Bluetooth® device is complete, the name of the connected device is indicated on the display. Move the device away from the unit.

•When the connection is not established even if your device has touched the NFC touch area, change its touching position.

3Start playback on the Bluetooth® device.

Viewing available information

You can view the following information on the display panel:

•Name of the connected device (maximum 16 characters).

•Bluetooth® profile used.

Press [DISPLAY-DIMMER].

Note:

A device is disconnected when you:

•Select a different source.

•Move the device out of the maximum range.

•Disable the Bluetooth® transmission of the device.

•Switch off the system or the device.

VQT5K74

13