Panasonic SC-MAX370 Bluetooth, Memory presetting, AM allocation setting, Pairing a device

Memory presetting

30 FM and 15 AM stations can be preset.

Automatic presetting

1Press [OK] to select “LOWEST” or “CURRENT” frequency.

2Press [PLAY MENU] to select “A.PRESET” and then press [OK].

“START?” is shown.

3Press [OK] to start presetting. To cancel, press [∫].

Manual presetting

1Press [6] or [5] to tune in to the station.

2Press [PROGRAM].

3Press the alphanumeric buttons to select a

preset number.

Do steps 1 through 3 again to preset more stations. The new station replaces any station that occupies the same preset number.

Selecting a preset station

Press the alphanumeric buttons, [:] or [9] to select the preset station.

Using the main unit

1Press [TUNE MODE] to select “PRESET”.

2Press [:/6] or [5/9] to select the preset station.

VQT5K74

12

AM allocation setting

By main unit only

This system can also receive AM broadcasts allocated in 10 kHz steps.

1Press [RADIO/EXT-IN] to select “FM” or “AM”.

2Press and hold [RADIO/EXT-IN].

After a few seconds, the display panel shows the current minimum radio frequency. Release the button when the minimum frequency changes.

•To go back to the initial setting, do the above steps again.

•After you change the setting, preset frequencies are erased.

Bluetooth®

You can connect and play an audio device wirelessly through Bluetooth®.

•Refer to the operating instructions of the Bluetooth® device for details.

•If you intend to use an NFC (Near Field Communication)-compatible Bluetooth® device, proceed to “One-Touch Connection (Connecting by NFC)”.

•Decrease the volume before connect the Bluetooth® device.

Pairing a device

Preparation

•Turn on the Bluetooth® feature of the device and place the device near this unit.

1 Press and hold [/MEMORY,-PAIRING] on main unit.

2Select “SC-MAX370” from the Bluetooth® menu of the device.

The device connects with this system automatically after pairing is complete.

3Start playback on the Bluetooth® device.

For other operations on main unit, refer to “Playing disc”.

Note:

•You can also operate with the remote control.

1 Press [, MEMORY] to select “BLUETOOTH”.

2 Press [PLAY MENU] to select “PAIRING”.

3 Press [2, 1] to select “OK? YES” and then press [OK]. 4 Select “SC-MAX370” from the Bluetooth® menu of the

device.

•If prompted for a passkey, input “0000”.

•A device must be paired to connect.

•You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced.

•This system can only connect to one device at a time.

•When “BLUETOOTH” is selected as the source, this system will automatically try and connect to the last connected device.