Clock and timers
Setting the clock
This is a
1Press [CLOCK/TIMER] to select “CLOCK”.
2Within 20 seconds, press [3, 4] to set the time.
3Press [OK].
Press [CLOCK/TIMER] to show the clock for a few seconds.
Note:
•Reset the clock regularly to maintain accuracy.
•The clock is reset when there is a power failure or when the AC power supply cord is removed.
Play and record timer
Except for Bluetooth® source
You can set the timer to come on at a certain time to:
•Wake you up (play timer)
•Record from the radio or the external equipment
(record timer)
Play timer and record timer cannot be used together.
Preparation
Set the clock.
| 1 | Press [CLOCK/TIMER] to select “ PLAY” or |
|
| “ REC”. |
| 2 | Within 10 seconds, press [3, 4] to set the start |
|
| time. |
| 3 | Press [OK]. |
| 4 | Do steps 2 and 3 again to set the end time. |
VQT5K74 | 5 | Press [3, 4] to select the source you want to |
| play or record and then press [OK]. | |
|
| |
| 6 | For record timer |
14 |
| Press [3, 4] to select “MEMORY” or “USB B” to |
| keep the recording and then press [OK]. |
To start the timer
1Prepare the audio source.
•Play timer
Prepare the music source you want to listen to (disc, USB, internal memory, radio or external equipment) and set the volume.
•Record timer
Connect the USB device to (for USB recording) and tune to the radio station or select the external equipment.
2Press [PLAY/REC ] to select “ PLAY ON” or
“ REC ON”.
“ PLAY ON” or “ REC ON” is shown.
To cancel, press [PLAY/REC ] to select “TIMER OFF”.
The system must be switched off for the timer to operate.
To check the settings
Press [CLOCK/TIMER] to select “ PLAY” or “ REC”.
Note:
•The play timer starts at a low volume and increases gradually to the preset level.
•The record timer starts 30 seconds before the set time with the volume muted.
•The timer comes on at the set time every day if the timer is on.
Sleep timer
The sleep timer switches off the system after the set time.
Press
To cancel, select “OFF”.
30 MIN > 60 MIN > 90 MIN > 120 MIN > OFF ^=================n
Note:
•The play and sleep timer or the record and sleep timer can be used together.
•The sleep timer always comes first. Be sure not to set an overlap of timers.
Sound and illumination
Adjust the sound effect
You can adjust the sound effect.
1Press [SOUND] to select the sound effect.
2Press [2, 1] to select the desired setting.
•BASS/MID/TREBLE
•SURROUND
“ON SURROUND” or “OFF SURROUND”
•INPUT LEVEL (For AUX IN 2)
“NORMAL” or “HIGH”
Note:
Select “NORMAL” if the sound is distorted during “HIGH” input level.
•SUPER WOOFER
“SW1”, “SW2”, “SW3” or “OFF”
•D.BASS
“D.BASS ON”, “D.BASS BEAT” or “D.BASS OFF”
Note:
D.BASS BEAT:This function emphasizes the attack level of the drum beat and produces a punchy sound.
•Depending on the type of a track, the effect may be small.
Preset EQ
Press [PRESET EQ] (main unit: [ PRESET EQ]) to select desired preset.