1Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
2Alphanumeric buttons
To select a
3Delete a programmed track Delete a selected track in a playlist
4Select audio source
5 Basic playback control
6 Select the sound effects
7 Start the title search for internal memory
8View content information
Press and hold the button: Decrease the brightness of the display panel and turn off the DJ function buttons and illumination, etc.
9Recording operation control
:Set the play timer or record timer ; Set the clock and timer
<Set the sleep timer
Press and hold the button: Automatically switch off function switches off the system if you do not use the system for 20 minutes. (Except radio)
=Set the program function
>Adjust the volume of the system
?Mute the sound of the system To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume or when you switch off the system.
@Set the play menu item
AInternal memory playlist operation B Select and enter buttons
CSet the edit mode for 
and internal memory
DInternal memory playlist direct buttons
Press and hold to add a track to the corresponding playlist. Press to select the playlist.
DJ function direct buttons
Press [DJ JUKEBOX], [DJ SAMPLER] or [DJ EFFECT] to switch on the DJ function. Press [1] to [6] on main unit to select the desired function. To cancel, press the selected [1] to [6] again.
ESwitch on the DJ function
To cancel, press the button again.
FTurntable for DJ and multi control
GBrowse playlist of the internal memory
Browse tracks or albums
Turn [MULTI CONTROL] to browse the track. Press [1/;] to start playback from the selection.
Press [ALBUM/TRACK] to select album or track and then turn [MULTI CONTROL] to browse.
Press [1/;] to start playback from the selection.
HOpen or close the disc tray
IRemote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left and right
JDisplay panel
K
PLAY USB port ( 
) USB status indicator
L
REC/PLAY USB port ( 
) USB status indicator
MSelect the illumination effect N AUX IN 2 terminal
O Microphone jack
P Adjust the volume of the microphone Q NFC touch area
R Disc tray
Disc
Playing disc
1Press [
OPEN/CLOSE] on the main unit to open the disc tray.
Put in a disc with the label facing up.
Press [ 
OPEN/CLOSE] again to close the disc tray.
2Press [CD] and then press [1/;] to start playback.
•Stop playback Press [∫].
•Pause playback
Press [1/;].
Press again to continue playback.
•Skip album 
Press [3, 4].
•Skip track
Press [:] or [9]
(main unit: [:/6] or [5/9]).
•Search through track
Press and hold [6] or [5]
(main unit: [:/6] or [5/9]).
Viewing available information
You can view the available information on the display panel.
Press
Note:
•Maximum characters that can be shown: approximately 32
•This system supports ver. 1.0, ver. 1.1 and ver. 2 ID3 tags.
•Text data that the system does not support can show differently.
VQT5K74
7
