Panasonic SC-PM29 Remote control, Placement of speakers, Battery installation

A

1

3 R6, AA, UM-3

2 2

B

Remote control	8
	POWER
signal sensor
	AC IN

/	h	S.SOUND EQ	RE-MASTER	PLAY LIST
REC					PUSH	RETRUN
					ENTER
		TUNER/BAND	CD q/ h	VOLUME
		STOP g	TAPE 7			;
AUX						CD
						CHANGE
CD		- DEMO				;
		CD 1 CD 2	CD 3 CD 4	CD 5		OPEN/
CHECK						CLOSE
				DOWN	UP

PHONES

30 30

Transmission	About 7 meters in
window
	front of the signal
	sensor.

C

RQT7372

The remote control

A Battery installation

Use of batteries

•	Align the poles (+ and -) properly when inserting the
	batteries.
•	Do not mix old and new batteries or different types of
	batteries.
•	Do not recharge ordinary dry cell batteries.
•	Do not heat or disassemble the batteries. Do not allow
	them to contact flame or water.
•	Remove the batteries if the unit is not to be used for a
	long time.
•	Do not keep together with metallic objects such as
	necklaces.
•	Do not use rechargeable type batteries.
•	Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

B Correct method of use

Operation notes

•	Do not place obstacles between the remote control signal
	sensor and remote control unit.
•	Do not expose the remote control signal sensor to direct
	sunlight or to the bright light of a fluorescent light.
•	Take care to keep the remote control signal sensor and the
	end of the remote control unit free from dust.
•	If this system is installed in a rack with glass doors, the
	glass doors’ thickness or color might make it necessary
	to use the remote control unit a shorter distance from the
	system.

To prevent damage

• Do not place heavy items on the remote control.

• Do not disassemble or reconstruct.

• Do not spill water or other liquids on the remote control.

CPlacement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary.

Note

•	Keep your speakers at least 10 mm away from the
	system for proper ventilation.
•	These speakers do not have magnetic shielding. Do
	not place them near televisions, personal computers or
	other devices easily influenced by magnetism.
•	To avoid damage to the speakers, do not touch the
	speaker cones if you have taken the nets off.

4