RQT7372
ACD selection and care
With this system, you can only play CDs having this mark.
(A )
Note on CD-R and CD-RW
This unit can play
*A process performed after recording that enables CD-
Do not;
• | use irregularly shaped CDs. ( B ) |
• | attach extra labels and stickers. |
• | use CDs with labels and stickers that are coming off or |
| with adhesive exuding from under labels and stickers. ( |
C)
• | attach |
| accessory. |
• | write anything on the CD. |
• | clean CDs with liquids. (Wipe with a soft, dry cloth.) |
• | use CDs printed with label printers available on the |
| market. |
|
|
| To prevent damage |
Always observe the following points.
Set the system on a flat, level surface.
• | Do not set it on top of magazines, inclined surfaces, etc. |
• | Do not move the system while tray is opening/closing, or |
| when loaded. Always unload all CDs before moving the |
| system. |
• | Do not put anything except a CD in the tray. |
• | Do not use cleaning CDs or CDs which are badly |
| warped or cracked. |
• | Do not disconnect the AC power supply cord from the |
| household AC outlet during CD changing operation. |
BSetting the time
This is a
The example shows how to set the clock for 2:15am.
1Press [8] to turn the unit on.
2Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button: CLOCK zPLAY zREC
Original display
3Within 7 seconds:
Press [u 2/REW] or [i 1/FF] to set the time.
Press and hold to change the time faster.
4Press [CLOCK/TIMER].
The time is set and the original display is restored.
Displaying the clock:
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Note
The clock may lose or gain some time over a period. Readjust if necessary.
8