Pioneer S-HTD340 Using the timer Chapter, Setting the wake-up timer, Set the switch-off time

Using the timer

Chapter 8

Using the timer

Setting the wake-up timer

Use the wake-up timer to set the system to switch on at any time and start playing whatever source you want.

•The clock must be set to the correct time for the wake-up timer to work properly (see Setting the clock on page 27).

STANDBY/ON

FM/AML1/L2

DVD/CD TUNER TV LINE

VOLUME

ENTER

TIMER

ENTER

SHIFT

08

1Select the source you want played. For example, press TUNER (TUNER FM/AM/ ST. on the front panel) to select the radio as your source.

2Prepare the source.

For example, tune in the radio station you want to wake up to.

3Set the volume.

4Press TIMER (SHIFT + 6) twice to reach the timer menu.

5	Use the	(cursor left/right) buttons
to select ‘Wake-Up?’ then press ENTER.
6	Use the	(cursor left/right) buttons

to select ‘Timer Edit?’ then press ENTER.

7 Set the switch-on time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

8 Set the switch-off time.

Use the (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

After pressing ENTER this last time, the wake- up indicator lights, and the switch-on, switch- off times, the function (DVD/CD, etc.) and volume are confirmed in the display.

9Switch the system into standby mode. The wake-up timer will not work if the system is left on!

55

En