DVD/CD/Video CD player, Sound Demo shows | Pioneer S-HTD340 guide

12Additional information

Problem	Remedy
Sound Demo shows in	• Press and hold (stop) on the front panel for about ﬁve seconds. The
the display and the unit	disc tray ejects automatically to indicate the Sound Demo mode is
can’t be controlled.	disabled.

Timer indicator is blinking	• Unplug the system, then plug back in. Wait for one minute then switch
and the system will not	on.
switch on.	• Make sure the fan at the rear of the system unit is not being blocked.
	• Check that the speakers are connected correctly.
	• Make sure the voltage of the mains power source is correct for the
	model.
	• If the problem persists, take it to your nearest Pioneer
	authorized service center or your dealer for servicing.

DVD/CD/Video CD player

Problem	Remedy
The disc is ejected	• Clean the disc.
automatically after	• Align the disc properly in the disc guide.
loading.	• If the region number on a DVD-video disc does not match the number
	on the system unit, the disc cannot be used (see DVD Video regions on
	page 68).
	• Allow time for any condensation inside the system unit to evaporate.
	Avoid using the system near an air-conditioning unit.

Playback is not possible.	• If the disc is loaded upside down, reload the disc with the label side face
	up.

Picture playback stops	• Press (stop), then (play) to start playback again.
and the operation buttons	• Switch the power off once, then on again using the front panel
cannot be used.	STANDBY/ON button.

Settings are canceled.	• When the power is cut due to power failure or by unplugging the power
	cord, settings will be canceled.

No picture/No color.	• Check that connections are correct and that plugs are inserted fully.
	• Check the instruction manual of the TV/monitor to make sure the TV/
	monitor settings are incorrect.

Screen is stretched or	• The TV Screen setting is incorrect. Set the TV Screen option to match
aspect does not change.	the TV/monitor you're using (see Video Output settings on page 63).

CD won’t play.	• Set the PhotoViewer menu option in the Initial Settings menu to Off to
	be able to play some copy-protected CDs. See Options on page 65.

74

En

Image 74

Pioneer S-HTD340 operating instructions DVD/CD/Video CD player, Sound Demo shows, STANDBY/ON button

Contents

Protect your new investment Receive a free Pioneer newsletter Wash hands after handling Important Safety Instructions Energy-saving design Contents Video Adjust menu Using the timerSurround sound and other settings Initial Settings menu Before you start FeaturesPutting the batteries in the remote control Before you start Chapter Before you start Disc / content format playback compatibilityUsing the remote control CD-R/RW compatibility About WMA PC-created disc compatibilityCompressed audio compatibility Jpeg file compatibility Connecting the speakers Connecting upConnecting up Chapter Match the colored wire with the color-coded Connecting upOn each wire Placing the speakers Front left Before mounting Connecting to your TVWall-mounting the surround speaker system Connecting using the S-video output Connecting using the component video output Plasma display Projection monitor receiver Using this unit with a Pioneer plasma display Listening to TV audio through this system Using the SR+ mode with a Pioneer plasma display To switch SR+ mode on/off, press SR+ Shift + Assembling the loop antenna Connecting up Connecting the supplied antennasPull off the protective shields of both AM antenna wires AM loop antenna Connecting the power FM wire antenna Front panel Controls and displaysControls and displays Chapter Controls and displays RPT and RPT-1 Timer indicatorsSpeaker indicators 12 2 PRO Logic II Controls and displays Remote control ST + Cursor buttons, Enter and tuning buttonsTune + QUIET/MIDNIGHT SR+ Shift + 7 Timer Shift + 6CH Level Shift + 5 Display Shift + 8 Getting started Chapter Switching on and setting upGetting started Getting started Using the Room SetupSetting the clock Setting up the remote to control your TV To select a room type then press Enter Getting started Using the on-screen displays Playing discs Basic playback controls Press OPEN/CLOSE to open the disc tray Load a disc Resume and Last Memory Using the front panel controlsResume and Last Memory Last Memory below Press Exchange or OPEN/CLOSE to close the disc tray Changing discsPress Exchange to open the disc tray Why won’t the disc I loaded play? DVD-Video disc menus Video CD PBC menus Listening to the radio Memorizing stations Press Enter to save the station presetImproving poor FM reception Tune to a frequency Select the source you want to listen to Listening to station presetsListening to other sources If necessary, start playback of the external source Listening to your system Auto listening modePress Surround to select the ‘Auto’ listening mode Listening to your system Chapter Listening to your system Listening in surround sound Dolby Pro Logic II Music settingsUse the cursor up/down buttons to adjust the setting Use the cursor up/down buttons Using Front Surround Press repeatedly to select from Listening to your system Listening with headphonesAdjusting the Advanced and Front Surround effect level Listening in stereo Listening with a virtual surround back speaker Using Quiet and Midnight listening modesListening to your system Enhancing dialogue To adjust the sound Listening to your system Adjusting the bass and treblePress Sound Mode Boosting the bass level Playing discs Chapter Playing only CDs and WMA/ MP3 discs CD modePlaying discs Scanning discs Using the Disc Navigator to browse the contents of a disc Frame advance/frame reverse To resume normal playback, select ‘Off’ from the menu Using repeat playLooping a section of a disc Select a random play option Using random playSelect a repeat play option Select ‘Program’ from the list of functions on the left Creating and editing a DVD program listPress Home Menu and select ‘Play Mode’ Select ‘Create/Edit’ from the list of program options Add further items to the program list in the same way Creating and editing a non- DVD program listPress Enter to add the highlighted item to the program list To play the program list, press play Program Program Step Disc Folder Track Other functions available from the program menu Select a search modeSearching a disc Press Enter to start playback Switching camera angles Playing discs Switching subtitlesSwitching DVD audio language Zooming the screen Front panel display information Displaying disc informationOSD disc information Viewing Jpeg discs Chapter Using the Jpeg Disc Navigator and Photo BrowserViewing Jpeg discs Playing a Jpeg slideshow Use the cursor buttons Navigate Using the Photo BrowserViewing Jpeg discs Setting the wake-up timer Using the timerUsing the timer Chapter Set the switch-off time Turning the wake-up timer on/off Using the timerSetting the sleep timer To check how much time is left, repeat steps 1 To select a switch-off time then pressTo select ‘Sleep?’ then press Enter Surround and sound setup options Surround sound and other settings ChapterUsing the System Setup menu Surround sound and other settings SR+ control options for Pioneer plasma displays Function setting for L1 input Function setting for DVD inputFunction setting for TV input Function setting for L2 input When you’re done, press Enter to exit test tone setup Video Adjust Video Adjust menuVideo Adjust menu Chapter Creating your own presets Using the Initial Settings menu Initial Settings menuInitial Settings menu Chapter Video Output settings Display settings Initial Settings menuLanguage settings Parental Lock Registering a new passwordOptions Setting/changing the Country code Changing your passwordSetting/changing the Parental Lock Select ‘Password Change’ Additional information Optional system settingsSystem Setup menu options in standby Additional information Chapter Additional information Resetting the systemUsing and taking care of discs Titles, chapters and tracks Discs to avoid Handling discsStoring discs Proper installation and maintenance of this system External AM antenna Connecting external antennasConnecting auxiliary components External FM antenna Buttons to select ‘Rec Mode?’ Recording modePress Sound Mode Use the Use To select ‘R.Mode On’ or ‘R.Mode Off’ General Additional information TroubleshootingSee Using the remote control on STANDBY/ON button DVD/CD/Video CD playerSound Demo shows WMA/MP3/JPEG discs Tuner Error Messages Widescreen TV users Selecting languages using the language code listAdditional information Screen sizes and disc formats Standard TV users Additional information Language code list Country code list Additional information Preset code list Marantz Additional information Glossary Dolby Digital Additional information Specifications Accessories Speaker system SubwooferPage Pioneer Corporation