RQT6530
12
Listening operations

CDs

This unit can play CD-DA (digital audio), MP3 and
WMA format audio CD-R and CD-RW that have been
finalized (a process that enables CD-R/CD-RW
players to play audio CD-R and CD-RW) upon
completion of recording.
It may not be able to play some CD-R or CD-RW due to
the condition of the recording.
The unit contains five CD trays.
You can simply listen to the CD on a single tray, or you
can select and listen to the CD in a particular tray. See
the section on All-Disc play (\ page 16) for information
on how to listen to all the CDs one after the next.
Listening to the CD on a single tray
1Press [c OPEN/CLOSE] to open the disc tray
and insert the CD.
The unit comes on automatically and tray 1 opens.
Press [c OPEN/CLOSE] again to close the tray.
2Press [2/
J CD] to start play.
The selected CD is played from the first track to the last
track in order. After the last track, the player stops
automatically.
3Adjust the volume.
To stop the disc
Press [L/–DEMO].
To pause play
Press [2/J CD]. Press [2/J CD] again to resume play.
Skipping tracks
Press [44
44
4/REW/ g] (backward) or [33
33
3
/FF/ f] (forward).
Searching through tracks
During play or pause
Press and hold [44
44
4/REW/g] (backward) or [33
33
3/FF/f]
(forward).
CD indicator
The CD indicator on the display lights whenever the tray is
in the playing position whether it is loaded or not.
One touch play
If the unit is in standby mode and a CD is loaded, press
[2/J CD] or [CD 1] ~ [CD 5].
The unit will come on automatically and play will start.
ACD selection and care
With this system, you can only play CDs having this mark. ( )
Do not;
•use irregularly shaped CDs. ( )
•attach extra labels and stickers.
•use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. ( )
•attach scratch-proof covers or any other kind of accessory.
•write anything on the CD.
•clean CDs with liquids. (Wipe with a soft, dry cloth.)
•use CDs printed with labels available on the market.
To prevent damage
Always observe the following points.
•Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
•Do not move the system while tray is opening/closing, or
when loaded. Always unload all CDs before moving the
system.
•Do not put anything except a CD in the tray.
•Do not use cleaning CDs or CDs which are badly warped
or cracked.
•Do not disconnect the power cord from the household AC
outlet during CD changing operation.
A
1
2
3
VOLUME
DOWN UP
a
2
1
b
c
OPEN/CLOSE
//
REW
(CD 1)
~
(CD 5)
/ , /
FF
3
CD
-/J
DEMO
c
1
CD indicator
Elapsed play time
Disc tray
Label must face upward.
Track number
Tray
number
RQT6530(11-15).p65 5/9/2002, 6:39 PM12