Before use

6

RQT6530

 

 

 

 

 

 

Connections

 

 

 

 

 

 

• Plug the AC power supply cord into a household AC outlet

 

 

 

 

 

 

only after all other connections have been made.

 

 

 

 

 

 

• To prepare the AM loop antenna wire and speaker cords,

 

 

 

 

 

 

twist the vinyl cover tip and pull off.

 

 

 

1

 

 

 

 

 

 

2

 

(L)

 

 

 

 

 

 

 

 

 

(R)

 

3

 

1 Connect the FM indoor antenna.

 

 

 

 

 

 

 

 

 

 

Tape the antenna to a wall or column, in a position

 

 

 

 

 

 

where radio signals are received with the least amount

 

 

 

 

 

 

of interference.

 

 

 

 

 

 

Note

 

 

 

 

 

4

For the best reception:

 

 

 

 

 

An FM outdoor antenna is recommended. (\ page 7)

1

 

Adhesive

 

 

 

2 Connect the AM loop antenna.

 

 

 

 

Stand the antenna up on its base. Keep loose antenna

 

tape

 

 

 

 

 

 

 

 

cord away from other wires and cords.

 

 

 

 

 

 

 

 

FM indoor

 

 

 

3 Connect the speaker cords.

 

 

 

 

 

A Confirm the colors of the tags on the ends of the

 

 

antenna

 

 

 

cords.

 

 

 

 

 

 

 

 

1

 

 

 

B For White tags:

 

 

2

 

Connect cords to gray terminals.

 

 

 

 

 

 

 

 

 

 

For Blue, Black and Red tags:

 

 

 

 

 

 

Connect cords so tag colors match the terminal

 

 

 

 

 

 

colors.

 

 

 

 

 

 

Cords with white and blue tags are for high frequency.

2

 

 

 

 

 

Cords with red and black tags are for low frequency.

 

 

 

 

 

Incorrect connection can damage the unit.

 

 

 

 

 

 

 

 

 

 

 

 

Caution

 

 

 

 

 

 

Use only the supplied speakers.

 

 

 

 

 

 

The combination of the main unit and speakers provide

 

 

 

 

 

 

the best sound. Using other speakers can damage the

 

 

 

 

 

 

unit and sound quality will be negatively affected.

 

AM loop antenna

 

 

 

Caution

 

 

 

 

 

 

Use the speakers only with the

 

 

 

 

 

 

recommended system. Failure to do

 

 

 

 

 

 

so may lead to damage to the

 

 

 

 

 

 

amplifier and/or the speakers, and

 

 

 

 

 

 

may result in the risk of fire.

3

 

 

 

 

 

Consult a qualified service person if

A

 

 

 

 

damage has occurred or if you

 

 

 

 

experience a sudden change in

 

 

 

 

White

 

performance.

 

 

 

 

Blue

 

Do not attach these speakers to walls

 

 

 

 

Black

 

or ceilings.

 

 

 

 

 

 

 

 

 

 

Red

 

4 Connect the AC power supply cord.

B

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

Gray (+)

 

2

 

 

The included AC power supply cord is for use with this

 

1

Red (ª)

 

Red (ª)

unit only. Do not use it with other equipment.

 

 

Black (·)

Black (·)

 

 

 

 

)

 

 

 

 

 

HIGH(6

 

 

 

 

 

Blue ()

3

 

 

 

 

 

 

)

 

 

 

 

 

LOW(6

 

 

 

 

 

Black ()

 

 

L

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

Red (+)

 

 

 

 

 

Page 6
Image 6
Panasonic SC-PM47 manual Connections