Timers and others
26
|
| SLEEP | CLOCK/ | PLAY/ | |
|
| TIMER | REC | ||
|
|
|
|
| |
1 | 2 |
|
|
| |
3 |
| DISC | |||
4 | 5 | 6 | ≥10 | ||
7 | 8 | 9 | 0 | ||
DISPLAY | DIMMER | PLAY MODE PROGRAM | |||
AUX | TUNER | TAPE | CD / | ||
ALBUM | /REW/ | /FF/ | /CLEAR | ||
|
| S SOUND EQ PRESET EQ MUTING | |||
|
| VOLUME |
| ||
CLOCK/
TIMER
Using the timers
Using the play/record timer
By remote control only
To check settings
While the unit is on and the “rPLAY” (or “rREC”) indicator is on, press [CLOCK/TIMER] so “rPLAY” (or “rREC”) appears on the display.
Two seconds after “rPLAY” (or “rREC”) appear, the settings are displayed in the following order:
• For play timer | • For record timer | |
1 | Play start time | 1Recording start time |
2 | Play finish time | 2Recording finish time |
3 | Play source | 3Recording source |
4Playback volume
You can check the settings even when the system is OFF by pressing [CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is completed
The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the CD numbers do not get stored in the timer memory.
1.After step 4, start playing the desired source.
2.Reset the CD numbers if you have changed any of them, confirm that a CD or cassette is inserted, then press [f] to put the unit on standby.
Note
•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.
•If the unit is on, the timer will not function. The unit must be in the standby mode.
•If AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source. If you want to playback or record from a connected unit, set the other unit’s timer to the same time. (See the other unit’s instruction manual.)
RQT6530
