|
|
| SLEEP | CLOCK/ | PLAY/ |
|
|
|
|
| REC |
|
| ||
| 4 | 1 | 2 | 3 | DISC | 3 |
|
| 4 | 5 | 6 | ≥10 |
| ||
|
| 7 | 8 | 9 | 0 | 5 |
|
|
| DISPLAY | DIMMER PLAY MODE PROGRAM | 2 |
| ||
/REW/ | , /FF/ | AUX | TUNER | TAPE | CD / | 7 | |
ALBUM | /REW/ | /FF/ | /CLEAR | 1 | |||
|
|
| S SOUND EQ PRESET EQ MUTING | 1 |
| ||
|
|
| VOLUME |
|
| ||
| 1 | CD | L /CLEAR |
operations | 2 | PROGRAM |
|
Listening | 3 | DISC |
|
4 1 2 3
4 5
5 | 1 | 2 | 3 |
|
| 4 | 5 | 6 | 10 |
| 7 | 8 | 9 | 0 |
Specified track 
number
Program order
7 CD
A
B | Indicates program mode | |
|
|
|
18
CDs
Program play
By remote control only
This function allows you to program up to 24 tracks.
1 Press [CD 2/ J] and then [L /CLEAR]. 2 Press [PROGRAM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the track you want to play in the desired sequence.
6 Repeat steps 3 through 5 until you have programmed all the tracks you want.
7 Press [CD 2/ J].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode. Programmed contents will be saved in memory.
To clear all programmed tracks
Press [L /CLEAR] in the stop mode. “CLEAR” is displayed.
To select a
Press [ 10] and then the two numbers you want.
When “CD FULL” appears
The number of programmed tracks is limited to 24. No further tracks can be programmed.
You can do the following during program mode:
•Check program contents.
Press [4/REW/ g] or [3/FF/f].
Every time you press one of the buttons, the track and program No. are shown on the display.
•Add to the program. Repeat steps 3 through 5.
Memory retention
Your program is retained in memory for about 1 week while the system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it again as explained below.
1.Press [PROGRAM].
2.Press [CD 2/ J].
If you program a track not on your CDs
The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item.
Note
•During program play, you can search forward or backward only within the current track.
•During program play, skipping is always in the programmed order, whether forward or backward.
RQT6530
