Panasonic SC-PT673 manual Getting Started, Other Operations, Reference, Menu 4 HDMI, Menu 2 Video

	To rotate a picture (during pause)
	[JPEG]:
ROTATION	0,------. 90,------.180,------.270
	^--------------------------------------------	J

Menu 4 (HDMI)

HDMI	To show HDMI information.
	(B below, Confirming HDMI information)

Menu 2 (Video)

	NORMAL
	CINEMA1:	Mellows images and enhances
PICTURE MODE CINEMA2:		detail in dark scenes.
		Sharpens images and enhances
		detail in dark scenes.
	DYNAMIC:	Enhances the contrast for

HDMI STATUS

HD ENHANCER

This works when the HDMI connection is being used with “VIDEO PRIORITY” (B 29, HDMI menu) set to “ON”.

To sharpen the “720p”, “1080i” and “1080p” picture quality

OFF, 1 (weakest) to 3 (strongest)

Getting Started

powerful images.

ANIMATION: Suitable for animation.

To select zoom sizes

NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4

≥[JPEG]: during pause

ZOOM

	This works when the HDMI connection is being
	used with “VIDEO PRIORITY” (B 29, HDMI
VIDEO FORMAT	menu) set to “ON”.

To select suitable picture quality with your TV (Video recordings will be converted to, and output as, high-definition video.)

TRANSFER MODE

If you have chosen “480p”/“720p”/“1080p” (progressive), “1080i” (interlaced) [“VIDEO FORMAT” in Menu 4 (HDMI)] or “PROGRESSIVE” under “VIDEO OUT (I/P)” (B 28, VIDEO menu), select the method of conversion for progressive output to suit the type of material.

≥The setting will return to “AUTO1” when the disc tray is opened, the unit is turned off or another source is selected.

AUTO1: Automatically detects the film and video content, and appropriately converts it.

AUTO2: In addition to “AUTO1”, automatically detects film contents with different frame rates and appropriately converts it.

VIDEO: Select if the video content is distorted when using “AUTO1” or “AUTO2”.

§480p/720p/1080p (progressive)

§480i/1080i (interlaced)

≥If the picture is distorted, press and hold [CANCEL] until the picture is displayed correctly. (The output will return to “480p”.)

§The numbers displayed depend on the disc being played. One of the above numbers is displayed.

	This works when the HDMI connection is being
	used with “VIDEO PRIORITY” (B 29, HDMI
COLOR SPACE	menu) set to “ON”.
	To select suitable picture color with your TV

YCbCr 4:2:2§

–Luminance and color details are sent separately. Most of the picture details are in luminance. The color rate is much higher than

composite video. Compatible with all TV models.

YCbCr 4:4:4§

Playing Discs

Other Operations

Menu 3 (Audio)

	To make the dialogue in movies easier to hear
	[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
DIALOGUE	with the dialogue recorded in the center channel)
	OFF, ON
ENHANCER

–All color details are sent. Luminance and color details are in the same signal.

RGB

– Component video type of signal.

≥If the setting above is not compatible with your TV, it will not be displayed.

§Terms are descriptions of the sample formats used in digital video. YCbCr is a video signal for luminance (Y), blue (Cb) and red (Cr) details.

Confirming HDMI information

e.g.

	HDMI --- INFORMATION
1	CONNECTED STATE	CONNECTED
2	AUDIO STREAM	PCM
3	MAX CHANNEL	2ch
4	VIDEO FORMAT	720p
5	COLOR SPACE	YCbCr 4:4:4

1Connection status

2Shows the output signal type.

3Shows the number of audio channels.

4 (B above, VIDEO FORMAT)

5 (B above, COLOR SPACE)

[Note]

When “OFF” is selected in “AUDIO OUT” (B 29, HDMI menu), “– – –” will be displayed in “AUDIO STREAM”.

Reference

RQTX0210

23