Quick Start Guide Getting Started
step 1 | Assembling the front speakers |
|
|
Preparation
≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥For assembly, use a
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥Keep the screws out of reach of children to prevent swallowing.
≥For optional wall mount, refer to page 27.
2 Front speakers | 2 Stands (with cable) | 2 Bases | 8 Screws |
1 |
|
Slide into the groove. |
|
Tighten securely. | 2 |
|
2 | Insert the wire fully. |
| |
| i: White |
| |
| j: Blue |
| |
| Push! |
| |
Position the cable |
| 1 | |
between the ridges. | Press into the groove. | ||
| |||
|
| ||
Leave about 120 mm (423/32z) | Tighten securely. |
| |
|
| ||
Speaker assembly option |
|
|
Thread the speaker cable through | Attach the speaker. |
the base. |
|
Leave about 120 mm (423/32z)
You can remove and use the cable from the stand. To reattach the cable, refer to page 27.
Insert the wire fully. i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Slide into the groove.
Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
e.g. Front speaker
String (not included)
Thread from the wall to the speaker and tie tightly.
Caution
Do not stand on the base. Be cautious when children are near. e.g. Front speaker
DO
NOT
RQTX0210
Rear of the speaker
|
|
|
| Approx. | |
|
|
|
| ||
Screw eye |
|
|
| 150 mm | |
Wall | |||||
(not included) | (529/32z) | ||||
6
